New Software for Product Link (PL300) Is Now Available {7606, 7620}
- Agricultural Tractor:
- All
- Articulated Truck:
- All
- Asphalt Paver:
- All
- Backhoe Loader:
- All
- Challenger:
- All
- Cold Planer:
- All
- Combine:
- All
- Compact Wheel Loader:
- ALL
- Earthmoving Compactor:
- All
- Excavator:
- All
- Integrated Toolcarrier:
- All
- Landfill Compactor:
- All
- Load Haul Dump:
- All
- Mini Hydraulic Excavator:
- All
- Motor Grader:
- All
- Multi Terrain Loader:
- All
- Off-Highway Truck/Tractor:
- All
- Paving Compactor:
- All
- Skid Steer Loader:
- All
- Soil Compactor:
- All
- Telehandler:
- All
- Track Feller Buncher:
- Caterpillar
- Track-Type Loader:
- All
- Track-Type Skidder:
- All
- Track-Type Tractor:
- All
- Wheel Dozer:
- All
- Wheel Loader:
- All
- Wheel Skidder:
- All
- Wheel Tractor-Scraper:
- All
- All
ReferenceSpecial Instruction, REHS2365-07, or Troubleshooting/System Operation/Testing and Adjusting, RENR7911-07.
New software for Product Link (PL300) is now available. The new 384-6463 Communication Software Gp replaces the former 330-3409 Communication Software Gp .
The new software for Product Link (PL300) has the following enhancements:
- Reduces excessive reporting of ECM information, which is monitored on the Cat® Datalink. This fix will not be evident to users or features in Equipment Manager or VisionLink, but reduces stress on systems such as satellite network and web infrastructure that processes inbound messages from Product Link.
- Reduces the occurrence of CID 1250 FMI 09.
Steps for flashing the New Software
- Download the flash file from SIS Web.
- Flash the PL300 (239-9954 Electronic Control Module or 285-1133 Electronic Control Module ) with the 3846463.fls file.
Note: Refer to the above references for appropriate procedures on flashing the software.
- After flashing the new software, adjust the internal Product Link clock to agree with the machine SMH as indicated on the hour meter.
- Flashing the PL300 will automatically cause registration message and an administration message to be queued.
Caterpillar Information System:
2012/03/23 A New Torque Converter Lip Seal is Available on Certain CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions {3105, 7555}
2011/11/29 A New Fuel Priming Pump with Serviceable Parts Is Used on C175-16 Engines {1258}
C7.1 Marine Propulsion Engine Speed/Timing Sensor
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Refrigerant Compressor
C175-16 Marine Propulsion Engines Configuration Parameters
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Gear and Bearing
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
320D and 323D Excavators Machine System Specifications Front Idler
C32 Marine Generator Set Overhaul (Top End)
C32 Auxiliary Engine Cold Weather Operation
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electrical Connectors
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Storage
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
320E and 323E Excavators Machine System Specifications Pump Coupling
C3.4B Engines Diesel Particulate Filter Has Differential Pressure Problem
320E and 323E Excavators Machine System Specifications Main Control Valve
CX31 On-Highway Transmission Transmission Planetary - Disassemble
CX31 On-Highway Transmission Transmission Planetary - Assemble
CX31 On-Highway Transmission Torque Converter Housing - Remove
CX31 On-Highway Transmission Torque Converter - Remove
CX31 On-Highway Transmission Torque Converter - Disassemble
CX31 On-Highway Transmission Torque Converter - Assemble
CX31 On-Highway Transmission Torque Converter - Install
CX31 On-Highway Transmission Retarder - Remove