Exhaust Bypass Valve
Show/hide table
Illustration 1 | g03561098 |
Show/hide table
Specification for 355-7183 Exhaust Bypass | |||
Item | Qty | Part | Specification Description |
1 | 1 | 4J-4382 Pipe Plug | Before assembly, lubricate the threads lightly with Loctite C5A Copper Anti-Seize. |
2 | 4 | 5P-2603 Taperlock Stud | Before assembly, lubricate the threads and bearing surface lightly with Loctite C5A Copper Anti-Seize. |
Torque to |
Show/hide table
Illustration 2 | g03561116 |
Detail of area A |
Show/hide table
Specification for 355-7183 Exhaust Bypass | |||
Item | Qty | Part | Specification Description |
3 | 2 | 5B-7890 Pipe Plug | Before assembly, lubricate the threads lightly with Loctite C5A Cooper Anti-Seize. |
4 | 4 | 3P-7019 Metal Seal | Before assembly, lubricate the bore lightly with clean engine oil. |
5 | 2 | 7L-3195 High Temperature Bolt | Before assembly, lubricate the threads and bearing surface lightly with Loctite C5A Copper Anti-Seize. |
6 | 4 | 395-1009 Taperlock Stud | Before assembly, lubricate the threads and bearing surface lightly with Loctite C5A Copper Anti-Seize. |
Torque to |
Show/hide table
Illustration 3 | g03561118 |
Detail of area B |
Show/hide table
Specification for 355-7183 Exhaust Bypass | |||
Item | Qty | Part | Specification Description |
7 | 1 | 7S-7816 Locknut | Torque to |
8 | 5 | 7C-9721 Screw | Torque to |
9 | 1 | 6V-8801 Nut | Torque to |
Caterpillar Information System:
C27 Generator Set Control Panel - Inspect/Test
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
3500 Generator Sets Coolant Level - Check
349F and 352F Excavators Hydraulic System Automatic Travel Speed Control - Test
3500 Generator Sets Coolant (ELC) - Change
3500 Generator Sets Coolant (DEAC) - Change
3512, 3508 and 3516 Generator Sets Refill Capacities
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Lead Connections
2011/09/28 New Rocker Arm Assemblies Are Available for Certain C15 Truck Engines {1102, 1123}
G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105} G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105}
2011/11/10 Spacers have been Added to the Shaft Shoulder of the Console Support on Certain Cat Excavators {7324}
CG137-08 and CG137-12 Generator Sets Engine Oil Pump
C3.4B Industrial Engine Stopping the Engine
3500 Generator Sets Coolant Temperature Regulator - Replace
C1.5 and C2.2 Industrial Engines Monitoring System - Engine Warning Indicators
C27 Generator Set Manual Stop Procedure
3516C Generator Sets Before Starting Engine
XQ400 Power Module Maintenance Recommendations
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180} Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700} Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
C3.4B Engines Inlet Air Is Restricted
2011/10/13 Service Replacement Bolts and Seal Washers Are Available for the High-Pressure Fuel Pump on C175-16 Engines {1251, 1290, 7553}