Control Panel - Inspect/Test
Inspect the condition of the panel. If a component is damaged, ensure that the component is repaired or that the component is replaced. If equipped, ensure that the electronic displays are operating properly. Inspect the wiring for good condition. Ensure that the wiring connections are secure.
Show/hide table
| |
| Illustration 1 | g01101388 |
It is possible to test the LED indicators and the horn when the data link is connected and when the data link is not connected. The Lamp Test button is located near the top of the annunciator panel. Test both the horn and the indicators by pressing and holding the Lamp Test button. Replace any faulty components before starting the engine.
Caterpillar Information System:
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
3500 Generator Sets Coolant Level - Check
349F and 352F Excavators Hydraulic System Automatic Travel Speed Control - Test
3500 Generator Sets Coolant (ELC) - Change
3500 Generator Sets Coolant (DEAC) - Change
3512, 3508 and 3516 Generator Sets Refill Capacities
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Lead Connections
2011/09/28 New Rocker Arm Assemblies Are Available for Certain C15 Truck Engines {1102, 1123}
G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105} G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105}
2011/11/10 Spacers have been Added to the Shaft Shoulder of the Console Support on Certain Cat Excavators {7324}
CG137-08 and CG137-12 Generator Sets Exhaust Bypass Valve
CG137-08 and CG137-12 Generator Sets Exhaust Bypass Valve
CG137-08 and CG137-12 Generator Sets Engine Oil Pump
C3.4B Industrial Engine Stopping the Engine
3500 Generator Sets Coolant Temperature Regulator - Replace
C1.5 and C2.2 Industrial Engines Monitoring System - Engine Warning Indicators
C27 Generator Set Manual Stop Procedure
3516C Generator Sets Before Starting Engine
XQ400 Power Module Maintenance Recommendations
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180} Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700} Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
C3.4B Engines Inlet Air Is Restricted