300.9D VPS Mini Hydraulic Excavator Machine Systems Caterpillar


Engine Oil Pressure Switch - Test

Usage:

300.9D DW2
本步骤用来测试发动机机油压力开关是否正常工作。

  1. 从机油压力开关上拆下接头。

  1. 起动发动机。 检查怠速转速是否正确。



    图 1g02700918

  1. 测量机油压力开关电阻。

    如果电阻为无限大,机油压力开关正常。

    如果机油可以通过,机油压力开关有缺陷。

Caterpillar Information System:

301.4C Mini Hydraulic Excavator Compression - Test
300.9D Mini Hydraulic Excavator Compression - Test
Fusion Quick Coupler Quick Coupler - Clean/Inspect
Installation Procedure for 370-8613{0679, 6502} Installation Procedure for 370-8613{0679, 6502}
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Single Secondary Fuel Filter
C4.4 Engines for Caterpillar Built Machines Exhaust Manifold
Installation Procedure for the 340-2917 Front Lines Gp On Certain Hydraulic Excavators{5057} Installation Procedure for the 340-2917 Front Lines Gp On Certain Hydraulic Excavators{5057}
3516C Generator Sets Glossary
C13, C15, and C18 Tier 4 Final Engines Front Housing and Covers
C4.4 Engines for Caterpillar Built Machines Water Separator and Fuel Filter (Primary)
C4.4 Engines for Caterpillar Built Machines Fuel Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Water Temperature Regulator
300.9D VPS Mini Hydraulic Excavator Machine Systems Coolant Temperature Switch - Test
301.4C Mini Hydraulic Excavator Basic Engine
300.9D VPS Mini Hydraulic Excavator Machine Systems Basic Engine
Wiring Harness Medium Wheel Loader Coupler Supply Groups{6700} Wiring Harness Medium Wheel Loader Coupler Supply Groups{6700}
320E and 323E Excavators Capacities (Refill)
G3500H 50Hz Generator Sets Rotating Rectifier - Check
G3500H 60Hz Generator Sets Coolant Temperature Regulator - Replace
Installation Procedure for the 340-2918 Pilot Lines Gp On Certain Hydraulic Excavators{5057, 5059} Installation Procedure for the 340-2918 Pilot Lines Gp On Certain Hydraulic Excavators{5057, 5059}
349E HVG UHD Mobile Hydraulic Power Unit Reference Material
320E RR Excavator Machine Systems Track - Separate
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
318E Excavator Systems Pump Control (Output Flow) - Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.