Temperature Sensor (Torque Converter Oil)
Show/hide table
 | |
| Illustration 1 | g03385880 |
Show/hide table
| Specification for 256-6453 Temperature Sensor | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | Final installation torque is 20 ± 3 N·m (177 ± 27 lb in). |
| - | - | - | Output type is passive. |
| - | - | - | Duty cycle is 10 to 90%. |
Caterpillar Information System:
Improper Adjustment of the Hoist Relief Valve on Certain Off-Highway Trucks{5069, 5117} Improper Adjustment of the Hoist Relief Valve on Certain Off-Highway Trucks{5069, 5117}
2011/08/29 A New Cat® Optimized Suspension Seat is Now Available for Certain Off-Highway Trucks {7324}
Cat® Detect Object Detection for Off-Highway Trucks Washing System - Optional Equipment
C3.4B Industrial Engine Engine Oil Pan - Cast Iron Oil Pan
C3.4B Engines For Caterpillar Built Machines Fan Drive
C7.1 Engines For Caterpillar Built Machines Diagnostic Trouble Codes
C7.1 Engines For Caterpillar Built Machines Power Is Intermittently Low or Power Cutout Is Intermittent
C9.3 Engines for Caterpillar Built Machines Camshaft
C9.3 Tier 4 Final Engines Camshaft
R1600G Load Haul Dump 3176C Engine Supplement Radiator Cap
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Crankcase Guard (Front) - Remove and Install
773G and 775G Off-Highway Truck Suction Screen (Transmission Scavenge) - Clean
773G and 775G Off-Highway Truck Power Train Gear Pump (Transmission Charging, Scavenge) Pressure - Test and Adjust
773G and 775G Off-Highway Trucks Retarding
Procedure to Install an Updated Body Position Switch on the 777F Off-Highway Trucks{1408, 7258} Procedure to Install an Updated Body Position Switch on the 777F Off-Highway Trucks{1408, 7258}
777G Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
777G Off-Highway Truck Additional Messages
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C3.4B Engines For Caterpillar Built Machines Electronic Control Module
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan
2011/08/09 An Updated Procedure is Available for the Blade Tip Cylinder on Certain 120H, 120M, 12H, 12M, 140H, 140M, 143H, 14H, 160H, 160M, 163H, and 16H Motor Graders {5106, 7562}
2011/08/05 Improved Clamps are Now Used for the Turbocharger Outlet to ATAAC Pipe on Certain 140M and 160M Series 2 Motor Graders {1071, 1380}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder (Logging Machines)