2015/04/07 Caterpillar


New VIMSpc Software Is Now Available On Certain Cat Product {0785, 7601}

Usage:

793B 1HL
Excavator:
5130 (S/N: 7TJ1-UP; 5ZL1-UP)
5130B (S/N: 4CS1-UP)
5230 (S/N: 7LL1-UP)
5230B (S/N: 4HZ1-UP)
Load Haul Dump:
R1600G (S/N: 9PP1-UP; 9YZ1-UP)
R1700G (S/N: SBR1-UP; 8XZ351-UP)
R2900G (S/N: GLK1-UP; JLK1-UP)
Motor Grader:
24H (S/N: 7KK1-UP)
Off-Highway Truck/Tractor:
773F (S/N: EED1-UP; EXD1-UP)
776D (S/N: AFS1-UP)
777D (S/N: AGC1-UP)
777F (S/N: JRP1-UP)
777G (S/N: TNM1-UP)
784B (S/N: 5RK1-UP)
784C (S/N: 2PZ1-UP)
785B (S/N: 6HK1-UP)
785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
785D (S/N: MSY1-UP)
789B (S/N: 7EK1-UP)
789C (S/N: 2BW1-UP)
789D (S/N: SPD1-UP; SHH1-UP)
793B (S/N: 1HL1-UP)
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
793D (S/N: FDB1-UP)
793F (S/N: SSP1-UP)
795FSeries AC (S/N: ERM1-UP)
797 (S/N: 5YW1-UP)
797B (S/N: JSM1-UP)
797F (S/N: LAJ1-UP)
Quarry Truck:
773G (S/N: MWH1-UP)
775F (S/N: DLS1-UP)
775G (S/N: RFM1-UP; MJS1-UP)
Track-Type Tractor:
D10R (S/N: AKT1-UP)
D10T (S/N: RJG1-UP)
D11R (S/N: AAF1-UP; 7PZ1-UP)
D9T (S/N: RJS1-UP)
Underground Articulated Truck:
AD30 (S/N: CXR1-UP; DXR1-UP)
AD45B (S/N: CXM1-UP)
AD55B (S/N: JNW1-UP)
Wheel Dozer:
854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
854K (S/N: 2211-UP)
Wheel Loader:
950K (S/N: R4A1-UP; J5M1-UP; FER1-UP)
962K (S/N: T6A1-UP; X4T1-UP)
966K (S/N: PBG1-UP; A5S1-UP; TFS1-UP; NGX1-UP)
972K (S/N: PEM1-UP; Z4W1-UP)
980K (S/N: W7K1-UP; GTZ1-UP)
992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
992K (S/N: H4C1-UP; 8801-UP)
993K (S/N: LWA1-UP; Z9K1-UP)
994 (S/N: 9YF1-UP)
994D (S/N: 3TZ1-UP)
994F (S/N: 4421-UP)
994H (S/N: DWC1-UP)
Service Magazine SEPD1312, 09 August 2011, "New VIMSpc Software Is Now Available On Certain Cat Product {0785, 7601}". Disregard the information in the article that is listed above. Refer to the information in the following article.

New Software Features and Updates

The following versions are included in the release of version 2011A:

  • VIMSpc software 2011A

  • Version 3.0.2 of the database

  • Version 11.0.2 of the master data

The following list contains the enhancements and modifications of VIMSpc version 2011A:

  • Support VIMS 3G, ABL2M, and 68K hardware platforms

  • Support both new file format from VIMS 3G and legacy formats from ABL2M and 68K

  • New user interface

  • Combines all the functionality of VIMS Supervisor, such as fleet capabilities.

  • Support the new Cycle Timer data type

  • Able to display 3D histogram data

  • Able to display GPS data in Event, Snapshot, Truck & Loader Payload reports

The following computer hardware, communication hardware and cables, and software are needed to run VIMSpc:

  • IBM® PC compatible with Pentium 1 GHz processor or greater

  • 1 GB RAM 500 MB of available hard drive space

  • Supported OS: Windows XP, Vista, and Windows 7, 32-bit and 64-bit

  • RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port

  • Ethernet port for use with the 305-5528 Cable As for VIMS 3G hardware

  • Adobe PDF reader Support of VIMSpc 2011A

For VIMS / DSN Support contact your local technical communicator.

  • JERD2175 (Customer Subscription)

  • JERD2137 (Dealer site license)

  • JERD2138 (Dealer subscription)

Caterpillar Information System:

422F, 428F, 432F, 434F and 444F Backhoe Loaders Hydraulic Oil Sample - Obtain
773G and 775G Off-Highway Trucks Specifications
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Fuel System Water Separator - Drain
PL87 Pipelayer Machine Systems Drawbar - Remove and Install
Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540} Procedure to Install a New Solenoid for the Autolube System on Certain 16M and 24M Motor Graders{7516, 7540}
2012/02/06 The Buffers for the Exhaust Temperature Sensors Are Relocated on C175 Engines in 793F, 795F, and 797F Off-Highway Trucks {1408}
Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154} Installing the New 368-4968 Engine Support Gp to Increase the Durability of the Front Housing on Certain PM-200 Cold Planers{1152, 1153, 1154}
428F, 432F, 434F and 444F Backhoe Loaders Additional Messages
C7.1 Engines For Caterpillar Built Machines NRS Exhaust Gas Temperature Is High
C7.1 Engines For Caterpillar Built Machines Intake Manifold Air Pressure Is Low
428F, 432F, 434F and 444F Backhoe Loaders Safety Messages
C7.1 Engines For Caterpillar Built Machines Inlet Air Temperature Is High
PL83 and PL87 Pipelayers Machine Systems Refrigerant Accumulator - Remove and Install
PL83 and PL87 Pipelayers Machine Systems Cable - Remove and Install
2011/09/14 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
PL83 and PL87 Pipelayers Machine Systems Boom - Remove and Install
PL87 Pipelayer Machine Systems Cooler Bypass Valve - Remove and Install
C9.3 Engines for Caterpillar Built Machines Mounting Straps
C9.3 Engines for Caterpillar Built Machines Mounting Straps
PL83 and PL87 Pipelayers Machine Systems Boom Sheave Block (Lower) - Disassemble
2011/09/12 An Improved Fan Shroud Assembly Is Now Used on Certain Off-Highway Trucks {1356}
773G and 775G Off-Highway Truck Suction Screen (Transmission Scavenge) - Clean
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Crankcase Guard (Front) - Remove and Install
R1600G Load Haul Dump 3176C Engine Supplement Radiator Cap
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.