Track Roller Mounting
Show/hide table
| |
| Illustration 1 | g02643519 |
Show/hide table
| Specification for 297-9162 Track and Carrier Roller Ar, 297-9164 Track and Carrier Roller Ar, 297-9167 Track and Carrier Roller Ar and 297-9163 Track and Carrier Roller Ar | |||
| Item | Qty | Part | Specification Description |
| A | - | - | Refer to Illustration 1 in order to install the track carrier roller.
Distance from the end of the flange to the centerline of the track is |
| 1 | - | - | Before assembly, the surfaces must be clean and free from protective coating. |
| B | - | - | Clearance between the track carrier roller and the mounting bracket is |
| 2 | 4 | 447-1733 Bolt | Torque to |
| 3 | - | 447-1724 Bolt | Torque to |
Caterpillar Information System:
Repair Procedure for Damaged Harness Wiring {1408} Repair Procedure for Damaged Harness Wiring {1408}
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Secondary) - Test
2011/07/14 Glow Plugs on Certain C6.6 Engines {1412}
2011/09/12 A New Gasket and a New Spacer Plate are Now Used on Certain Reman 3500 Engines {1100, 1201, 7555}
G3406 Engine Spark Plugs - Inspect/Adjust/Replace
CG137-08 and CG137-12 Engines Gas Pressure Regulator - Remove and Install
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Primary) - Test
G3406 Engine Fuel Filter Differential Pressure - Check
2011/10/06 Warning Film Is Available for the High Pressure Fuel Pump on C175-16 Engines {1251, 1290, 7405}
3500C Marine Engines Gear Group (Front)
3500 Engines Housing (Front)
G3406 Engine Engine Mounts - Inspect
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 , C13 , and C15 Engines with Standard (Deep) Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with Optional Shallow Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with 500 HP Field Up-Rates and 525 HP RV Ratings with Standard (Deep) Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with 500 HP Field Up-Rates and 525 HP RV Ratings with Optional (Shallow) Oil Sumps
3500B Engines Engine Mount
345B Series II Excavator Machine System Specifications Bucket Cylinder
3516C Generator Set Engines Gear Group (Rear)
G3512 Gas Engine Flywheel
3516C Generator Set Engines Flywheel Housing
3512B and 3512C Petroleum Generator Set Engines Flywheel Housing Cover
3500C Marine Engines Vibration Damper Guard
CG137-08 and CG137-12 Engines Rotary Actuator (Carburetor) - Remove and Install - G3412B