992K Wheel Loader and 854K Wheel Dozer Braking System Caterpillar


Parking Brake

Usage:

992K 880


Illustration 1g01446763
Location of the components for the parking brake
(1) Spring
(2) Plate
(3) Disc
(4) Bolt
(5) Bolt
(6) Hub
(7) Shaft
(8) Chamber
(9) Plate
(10) Pin
(11) Bearing cage
(12) Piston
(13) Plate

The parking brake is positioned on the output transfer gear case. The parking brake is a multiple disc brake with a dry cavity which is engaged by springs (1).

Plates (13) react against four pins (10) that are anchored in bearing cage (11). Discs (3) have splines on the inside diameter which engage with hub (6). The hub is splined to shaft (7). The shaft is driven by one of the transfer gears. The discs turn with the transfer gear shaft.



Illustration 2g02683117
Location of the parking brake control knob
(14) Parking brake control knob

Parking brake control knob (14) is positioned on the left side of the dashboard. This knob operates the parking brake control valve.

When parking brake control knob (14) is pushed in, oil flows from the accumulators to chamber (8) behind piston (12). Piston (12), plate (9), and bolts (4) are pushed to the left when the oil fills chamber (8). Shaft (7) is able to rotate when the pressure on plates (13) and on discs (3) is released.

When parking brake control knob (14) is pulled out, the flow of oil from the accumulator stops. The flow of oil to the parking brake also stops. Oil in chamber (8) drains back to the hydraulic oil tank. Springs (1) then exert force on plate (2). Discs (3) and plates (13) are clamped together. This compression of discs (3) and plates (13) engage the parking brake.

When the pressure in the accumulators decreases below 6890 ± 345 kPa (1000 ± 50 psi), the parking brake engages. The position of the control knob indicates the status of the parking brake.

Caterpillar Information System:

D6K2 Track-Type Tractor Engine Crankcase Breather Filter - Replace
992K Wheel Loader and 854K Wheel Dozer Braking System Service Brakes
992K Wheel Loader and 854K Wheel Dozer Braking System Brake Control Valve (Parking)
992K Wheel Loader Battery Disconnect Switch
992K Wheel Loader and 854K Wheel Dozer Braking System Torque Converter Impeller Clutch Operation
Installation of Window Seals on Caterpillar Products With a Cab{7308} Installation of Window Seals on Caterpillar Products With a Cab{7308}
992K Wheel Loader and 854K Wheel Dozer Braking System Brake Control Valve (Service)
992K Wheel Loader and 854K Wheel Dozer Braking System High Pressure Screen Group (Deluxe Filtration)
992K Wheel Loader and 854K Wheel Dozer Braking System Piston Pump (Brake)
D6K2 Track-Type Tractor Engine Air Precleaner - Clean
992K Wheel Loader and 854K Wheel Dozer Braking System Electronic System Components
992K Wheel Loader and 854K Wheel Dozer Braking System General Information (Brake)
992K Wheel Loader and 854K Wheel Dozer Braking System Parking Brake Interlock
992K Wheel Loader Service Center
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Flexible Exhaust Pipe - Remove and Install - Tractor
992K Wheel Loader Engine Starting with Auxiliary Start Receptacle
992K Wheel Loader Specifications
992K Wheel Loader Bucket Rated Load
854K Wheel Dozer Specifications
D6K2 Track-Type Tractor Engine and Machine Warm-Up
D6K2 Track-Type Tractor Engine Oil Sample - Obtain
D6K2 Track-Type Tractor Engine Oil and Filter - Change
D6K2 Track-Type Tractor Equalizer Bar Center Pin - Lubricate
D6K2 Track-Type Tractor Equalizer Bar Pins and Recoil Bearings - Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.