2011/09/12 Caterpillar


A New Gasket and a New Spacer Plate are Now Used on Certain Reman 3500 Engines {1100, 1201, 7555}

Usage:

793B 1HL
Engine:
3508 (S/N: 5TL1-UP; 4ZL1-UP)
3508B (S/N: BWA1-UP; BTB1-UP; KAM1-UP; BTR1-UP; 5XS1-UP)
3512 (S/N: 5EL1-UP; 6FL1-UP)
3516 (S/N: 6CL1-UP; 7CL1-UP)
3516B (S/N: KDK1-UP; MSK1-UP; KNS1-UP; 7DS1-UP; CPW1-UP; MSX1-UP)
3524B (S/N: NPM1-UP)
C15 (S/N: SDP1-UP)
Excavator:
5130 (S/N: 7TJ1-UP; 5ZL1-UP)
5130B (S/N: 4CS1-UP)
5230 (S/N: 7LL1-UP)
5230B (S/N: 4HZ1-UP)
Off-Highway Truck/Tractor:
776C (S/N: 2TK1-UP)
777 (S/N: 84A1-UP)
777B (S/N: 4YC1-UP)
777C (S/N: 4XJ1-UP)
777D (S/N: AGC1-UP; FKR1-UP; 3PR1-UP)
777D HAA (S/N: AGY1-UP)
784C (S/N: 2PZ1-UP)
785 (S/N: 8GB1-UP)
785B (S/N: 6HK1-UP)
785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
785D (S/N: DMC1-UP; MSY1-UP)
786 (S/N: 01A1-UP; 81A1-UP)
789 (S/N: 9ZC1-UP)
789B (S/N: 7EK1-UP)
789C (S/N: 2BW1-UP)
789D (S/N: SPD1-UP; SHH1-UP)
793 (S/N: 3SJ1-UP)
793B (S/N: 1HL1-UP)
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
793D (S/N: FDB1-UP)
797 (S/N: 5YW1-UP)
797B (S/N: JSM1-UP)
Track-Type Tractor:
D11N (S/N: 4HK1-UP; 74Z1-UP)
D11R (S/N: AAF1-UP; 8ZR1-UP; 9TR1-UP; 9XR1-UP; 7PZ1-UP)
Wheel Dozer:
854G (S/N: AMP1-UP; 1JW1-UP)
Wheel Loader:
992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
994 (S/N: 9YF1-UP)
994D (S/N: 3TZ1-UP)
994F (S/N: 4421-UP)
Service Magazine SEPD1343, 13 October 2011, "A New Gasket and a New Spacer Plate are Now Used on Certain Lafayette Reman 3500 Engines". The original article has been revised to add effectivity above and to add two Reman engine arrangements and serial numbers below.

Description of Change: A new gasket and a new spacer plate are now used on certain Reman 3500 engines.

Adaptable To: The new Multi-Layer Steel (MLS) gasket and the new spacer plate are adaptable to the serial numbers that are listed above. Table 1 lists the new part numbers and the part numbers being replaced.

Table 1
Qty     New Part Number     Part Name     Former Part Number    
1     362-8264     Cylinder Head Gasket     110-6991
274-8567    
1     362-9677     Spacer Plate     110-6994    
The information in Table 2 illustrates the first Reman engine serial number for each arrangement built with the MLS gasket.

Table 2
Arrangement Number     Effective Serial Number    
10R0946     KNS570    
0R7568     CPW1217
SPW102    
10R2852     MSK253    
10R1433     NPM259    
0R8551     5XS1058    
0R9840     BTB351    
0R9844     SDW391    
10R6700     SDW392    
0R3981     5TL1071    
0R9551     7DS1089    
0R9842     KAM385    
0R3951     4ZL1487    
0R3982     6FL990    
0R9558     7DS1090    
0R9583     7CL2070    
0R9659     7CL2071    
0R3953     6CL649    
0R8553     5XS1064    
0R8558     7DS1092    
0R9845     7DS1091    
10R6702     7DS1093    
0R3985     5TL1078    
0R3950     4ZL1490    
0R3983     7CL2079    
0R8554     6SS221    
0R9843     BWA195    
0R8555     7DS1102    
0R8550     5XS1076    
0R3980     5TL1083    
0R8556     7DS1111    
10R9195     KAM389    
0R9557     7DS1114    
10R5596     BTR621    
0R3959     7CL2090    
0R3986     7CL2091    
0R3952     5EL420    
0R3955     6CL653    
0R8552     5XS1083    
0R8557     7DS1140    
10R2851     7DS1143    
10R2854     MSX00264    
10R7930     SPM421    
10R931     SKN360    

Caterpillar Information System:

G3406 Engine Spark Plugs - Inspect/Adjust/Replace
CG137-08 and CG137-12 Engines Gas Pressure Regulator - Remove and Install
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Primary) - Test
G3406 Engine Fuel Filter Differential Pressure - Check
2011/10/06 Warning Film Is Available for the High Pressure Fuel Pump on C175-16 Engines {1251, 1290, 7405}
3500C Marine Engines Gear Group (Front)
3500 Engines Housing (Front)
G3406 Engine Engine Mounts - Inspect
CG137-08 and CG137-12 Engines Electric Starting Motor - Remove and Install
349F and 352F Excavators Machine System Specifications Sprocket
3500C Marine Engines Crankshaft
349F and 352F Excavators Machine System Specifications Fasteners - Swing Drive and Motor
2011/07/14 Glow Plugs on Certain C6.6 Engines {1412}
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Secondary) - Test
Repair Procedure for Damaged Harness Wiring {1408} Repair Procedure for Damaged Harness Wiring {1408}
345B Excavator Machine System Specifications Track Roller Mounting
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 , C13 , and C15 Engines with Standard (Deep) Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with Optional Shallow Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with 500 HP Field Up-Rates and 525 HP RV Ratings with Standard (Deep) Oil Sumps
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 and C13 Engines with 500 HP Field Up-Rates and 525 HP RV Ratings with Optional (Shallow) Oil Sumps
3500B Engines Engine Mount
345B Series II Excavator Machine System Specifications Bucket Cylinder
3516C Generator Set Engines Gear Group (Rear)
G3512 Gas Engine Flywheel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.