Electric Starting Motor
Show/hide table
 | |
| Illustration 1 | g02615836 |
Show/hide table
| Specification for 338-3456 Electric Starting Motor Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 6V-8188 Nut | Torque to 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in). |
| 2 | 1 | 4B-2049 Nut | Torque to 3.4 ± 1.2 N·m (30.1 ± 10.6 lb in). |
| 3 | 1 | 4B-2049 Nut | The switch terminal must be insulated with heat shrinkable tubing. Do not use molded terminals. Torque to 3.4 ± 1.2 N·m (30.1 ± 10.6 lb in). |
| 4 | 1 | 6V-8188 Nut | Torque to 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in). |
| 5 | 1 | 6V-8188 Nut | A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG. Torque to 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in). |
| 6 | 2 | 6V-8188 Nut | Torque to 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in). |
| B | - | - | Clearance between the pinion and the housing is 9.1 mm (0.36 inch). |
| - | - | - | Pull-in current at 20 V and 25 °C (77 °F) is 49.3 ± 3.3 Amp. |
| Hold-in current at 20 V and 25 °C (77 °F) is 6.8 Amp max. |
|||
| - | - | - | When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction. |
| - | - | - | No load conditions at 25 °C (77 °F): |
| Speed is 6950 ± 1650 rpm. | |||
| Current draw is 115 ± 25 Amp. | |||
| Voltage is 23 VDC. | |||
Caterpillar Information System:
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Crankcase Breather
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Fan Drive
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Flywheel Housing
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Aftercooler Coolant Temperature Sensor
SH-56B Felling Head Felling Head Cutoff System
C15 Generator Sets Sensors and Electrical Components
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Solenoid Valve (Differential Lock) - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Power Train System Pressure - Release
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders Safety Messages
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Power Train Troubleshooting
PL87 Pipelayer Power Train System Pressure - Release
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Alternator Mounting
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Monitoring System
2011/07/18 New Hose Assemblies and New Clips Improves the Hoist Line Group on 797B Off-Highway Trucks {5057}
Sound Attenuation for Certain Off-Highway Trucks{0116, 1801, 1806, 7076, 7261, 7329} Sound Attenuation for Certain Off-Highway Trucks{0116, 1801, 1806, 7076, 7261, 7329}
PL87 Pipelayer Power Train Priority Valve - Disassemble
2011/08/05 A New Torque Procedure is Used on the Bolts in the Circle Drive Group on Certain Motor Graders {5207}
SS-56 Felling Head Piston Motor (Disc Saw)
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Lines (Air Compressor)
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Twin Turbocharger
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Side mounted Turbocharger
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Top mounted Turbocharger
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Engine Oil Filter