Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553} Caterpillar


Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}

Usage:

793B 1HL
Caterpillar Products:Machine Engines All 3500 Series
Caterpillar Products: 3500 Family Generator Sets and Power Modules 3500 Family Pumpers 3500C Engines G3500 Family Generator Sets and Power Modules
Engine:Commercial 3500 and 3500B G3500 Family
Engine:Generator Set 3500 Series

Introduction

The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

Some 7N-2405 Bolts were manufactured by a supplier that has not been approved by Caterpillar. Some of those bolts are in the parts system.

Solution

Do not use any 7N-2405 Bolts that are stamped with the CAT logo and "ATC".

Quarantine the bolts and hold the bolts until further notice.

Caterpillar Information System:

TA19 Agriculture Transmission Electronic Control System Electrical Connector - Inspect
854K Wheel Dozer and 992K Wheel Loader Power Train Diagnostic Capabilities
TA19 Agriculture Transmission Electronic Control System Determining Diagnostic Trouble Codes
TA19 Agriculture Transmission Electronic Control System Connector Contact Description
CD44B and CD54B Vibratory Asphalt Compactors Turbocharger - Inspect
TA19 Agriculture Transmission Electronic Control System MID 081 - CID 1408 - FMI 05
TA19 Agriculture Transmission Electronic Control System MID 081 - CID 1484 - FMI 07
TA19 Agriculture Transmission Electronic Control System MID 081 - CID 1484 - FMI 02
C15 Petroleum Generator Set Engines Valve Mechanism Cover
2013/03/13 A New Top O-Ring Seal Is Used on the Cylinder Liner in C175-16 and C175-20 Engines {1201, 1216, 7555}
C3.4B Industrial Engine Alternator and Fan Belts - Replace
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
TA19 and TA22 Transmissions Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
793F CMD Off-Highway Truck/Tractor Braking System Electronic Control Module (ECM) - Replace
TA19 and TA22 Transmissions Power Train Electronic Control System Inching Pedal - Calibrate
TA19 Agriculture Transmission Electronic Control System Machine Preparation for Troubleshooting
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System Service Tools
TA19 Agriculture Transmission Electronic Control System System Schematic
TA19 and TA22 Transmissions Power Train Electronic Control System Transmission Fill - Calibrate
TA19 and TA22 Transmissions Power Train Electronic Control System Wiring Harness (Open Circuit) - Test
TA19 and TA22 Transmissions Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
TA19 and TA22 Transmissions Power Train Electronic Control System Transmission, SPN 739 - FMI 6
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Wiring
TA19 and TA22 Transmissions Power Train Electronic Control System Transmission, SPN 739 - FMI 5
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.