C13, C15, and C18 Tier 4 Final Engines Caterpillar


Housing (Front)

Usage:

826K 232


图 1g02546337
典型示例

表 1
175-1483 前壳体、 248-2609 前壳体总成、 353-2595 前壳体和 353-2790 前壳体总成的技术规格 
项目  数量  零件  技术规格说明 
3E-8044 螺柱  在装配前,向螺纹上涂覆红色 Loctite 271。 
按照以下步骤拧紧将盘固定到缸体上的螺栓。 
将八个锁紧螺栓拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)
再次拧紧八个锁紧螺栓至扭矩为 55 N·m (41 lb ft)


图 2g02546356
右视图

表 2
项目  数量  零件  技术规格说明 
在装配期间,壳体的后端面和缸体的前端面上绝不能有机油、燃油、水、污垢、装配固定胶以及任何其他污染物。 
装配之后,修剪垫片并使垫片和壳体端面平齐。
涂覆超蓝 Loctite 587 以便填充前板、油底壳垫片和缸体之间的结合缝隙。


图 3g02546358

表 3
项目  数量  零件  技术规格说明 
只有拧紧了两个螺母 (5) 之后,才能拧紧 12 个圆头螺钉 (4)。
将 12 个圆头螺钉拧紧至扭矩为 21 ± 3 N·m (185 ± 25 lb in) 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.