Coolant System - Flush
Show/hide table
注意事項 |
---|
在檢驗、保養、測試、調整及修理產品時,請小心確保油液有容器盛裝。 在打開任何艙室或拆卸任何含有用液的組件前,應準備好盛裝用液的適當容器。 請參閱特別出版品, P4RJ1017, "代理商維修工具目錄",以瞭解適合用來收集及容納 Cat® 產品之液體的工具和耗材。 按照當地的條例和法規棄置廢棄的油液。 |
附註在保固期間,只有 Cat 代理商可以執行此程序。
請參閱操作及維護手冊, "冷卻系統冷卻液 - 更換"以瞭解更多有關冷卻系統排放和加注的資訊。
- 用清水沖洗系統,以便除去髒污。
- 使用冷卻系統清潔劑來清潔系統。 請遵循標牌上的說明進行操作。
- 把清潔劑排到適當的容器中。 用清水沖洗冷卻系統。
- 將清水注入冷卻系統並讓引擎運轉直到變溫熱為止。
Show/hide table
注意事項 不適當或不完整的清洗冷卻系統會造成銅製品及其他金屬組件的損壞。
欲避免冷卻系統的損壞,請確認以清潔的水徹底的清潔冷卻系統。 持續清除系統直到所有清潔劑的標誌都消除。
- 把冷卻系統的冷卻液排到適當的容器中,並以清水沖洗冷卻系統。
附註將冷卻系統清潔劑從冷卻系統中徹底沖洗乾淨。 系統中殘餘的冷卻系統清潔劑將污染冷卻液。 清潔劑也可能腐蝕冷卻系統。
- 重複步驟 4 和 5 直到冷卻系統乾淨為止。
- 將冷卻液注入冷卻系統。
附註請參閱操作及維護手冊, "一般危險事項",了解盛裝溢放液體的相關資訊。
Caterpillar Information System:
C7.1 Engines For Caterpillar Built Machines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C4.4 Industrial Engine Exhaust Elbow - Remove and Install - Top Mounted and Side Mounted Turbocharger Exhaust Elbow
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1130 - FMI 05
C7.1 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
C7.1 Engines For Caterpillar Built Machines Fuel Pump Relay Circuit - Test
300.9D and 300.9D VPS Mini Hydraulic Excavator Main Relief Valve - Check
300.9D and 300.9D VPS Mini Hydraulic Excavator Battery Electrolyte Level - Check
300.9D and 300.9D VPS Mini Hydraulic Excavator Bucket Tips - Inspect/Replace
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Exhaust Elbow - Remove and Install
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine and Machine Warm-Up
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers General Hazard Information
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Fire Prevention and Explosion Prevention
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1627 - FMI 05
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1627 - FMI 03
Procedure to Install Waste Handling Arrangement on Series D Wheeled Excavators{1353, 1356, 1360, 1386, 1387, 1408, 1931, 5057, 5061, 7000, 7255, 726A, 7272, 7490, 7600, 7601, 7610, 7620} Procedure to Install Waste Handling Arrangement on Series D Wheeled Excavators{1353, 1356, 1360, 1386, 1387, 1408, 1931, 5057, 5061, 7000, 7255, 726A, 7272, 7490, 7600, 7601, 7610, 7620}
300.9D and 300.9D VPS Mini Hydraulic Excavator Service Interval Chart
Wheeled Excavators Monitoring System Prestart Monitoring Function
300.9D and 300.9D VPS Mini Hydraulic Excavator System Pressure Release
2014/08/25 New Torque Specification for the Self-Locking Nut on the Rod Assembly of the Stick Cylinder for Certain Excavators {5458}
314E CR and 314E SR Excavator Systems General Information
301.4C Mini Hydraulic Excavator Battery or Battery Cable - Inspect/Replace
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine Valve Lash - Check/Adjust
300.9D and 300.9D VPS Mini Hydraulic Excavator Fuel Injection Timing - Check/Adjust
300.9D and 300.9D VPS Mini Hydraulic Excavator Fuel Injection Pump - Clean/Adjust