Carburetor - Disassemble
拆解步骤
开始:
- 拆下空燃混合器。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺钉 (5) 、垫圈和盖 (4) 。
Show/hide table
 | |
| 图 1 | g02453059 |
Show/hide table
 |
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
- 将弹簧 (3) 和膜片组件 (2) 从底座组件 (1) 上拆下。
- 将怠速螺钉 (6) 和弹簧 (7) 从底座组件 (1) 上拆下。
Caterpillar Information System:
C11 and C13 Industrial Engines Engine Oil Level - Check
G3304B and G3306B Engines Throttle Control Valve - Install
G3304B and G3306B Engines Throttle Control Valve - Remove
C15 Petroleum Engines Engine Oil Level - Check
UPSB505 Uninterruptible Power Supply Frequency Converter Connection
G3304B and G3306B Engines Fuel Control Actuator - Remove and Install
C4.4 Industrial Engine Electronic Control Module
C4.4 Industrial Engine Atmospheric Pressure Sensor
C15 Petroleum Engines Belt Tensioner - Check
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys User Interface for Multiple Module Unit
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys User Interface for System Cabinet
C15 Petroleum Engines Refill Capacities
UPSB505 Uninterruptible Power Supply Parallel UPS Connection
G3304B and G3306B Engines Carburetor - Assemble
312F and 313F Excavators Sound Information and Vibration Information
UPSB505 Uninterruptible Power Supply Static Switch Connection
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Battery - Replace
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Air Filter Element - Clean/Replace
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Flywheel - Clean
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Sight Gauge - Clean
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Oil Level - Check
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Model View Illustrations
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys System Description
TA19 Transmission Transmission - Assemble