Cab - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 5P-8622 | Clevis | 4 |
Start By:
- Remove the ROPS.
- Release the hydraulic system pressure.
- Disconnect brake valve (1) from the underside of cab (2). Set brake valve (1) aside.
Show/hide table
Illustration 2 g02440999 - Disconnect hose assemblies (3). Disconnect cable assembly (4).
Show/hide table
Illustration 3 g02441236 - Disconnect ground cable (5).
Show/hide table
Illustration 4 g02441256 - Remove cover assembly (6).
Show/hide table
Illustration 5 g02441396 - Cut cable straps (8).
- Disconnect harness assemblies (7).
- Disconnect hose assemblies (9).
- Remove cable clamps (10).
Show/hide table
Illustration 6 g02441557 - Disconnect cable assembly (12) and harness assembly (11). Remove cable clamp (13).
Show/hide table
Illustration 7 g02441596 - Disconnect hoses (14).
Show/hide table
Illustration 8 g02442037 - Attach Tooling (A) and a suitable lifting device to cab (2). The weight of cab (2) is approximately
1361 kg (3000 lb) .Show/hide tableIllustration 9 g02442158 - Remove floor mat (15).
Show/hide table
Illustration 10 g02442162 - Remove cover (16).
Show/hide table
Illustration 11 g02442181 - Remove bolt (17) and the washer.
- Repeat Steps 13 and 14 for the other side of the cab.
Show/hide table
Illustration 12 g02442188 - Remove cover (18).
Show/hide table
Illustration 13 g02442198 - Remove bolt (19) and the washer.
- Repeat Steps 16 and 17 for the opposite side of the machine.
Show/hide table
Illustration 14 g02442037 - Use Tooling (A) and the suitable lifting device in order to remove cab (2) from the machine.
Show/hide table
Illustration 1 | g02440896 |
Caterpillar Information System:
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 04
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake System Air - Purge
D6N Track-Type Tractor Hydraulic System Oil Sample - Obtain
D6N Track-Type Tractor Hydraulic System Oil Level - Check
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 03
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 13
D6N Track-Type Tractor Hydraulic System Oil Filter - Replace
980K Wheel Loader Electrohydraulic System MID 082 - CID 2286 - FMI 13
980K Wheel Loader Electrohydraulic System MID 082 - CID 2286 - FMI 08
D6N Track-Type Tractor Fuel Tank Water and Sediment - Drain
980K Wheel Loader Electrohydraulic System MID 082 - CID 2286 - FMI 04
D6N Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
D7E Track-Type Tractor Monitoring System Diagnostic Code List
980K Wheel Loader Electrohydraulic System MID 082 - CID 2285 - FMI 08
950K, 962K, 966K, 972K and 980K Wheel Loaders Monitoring System Using the Operator Monitor to Determine Diagnostic Codes
D6N Track-Type Tractor Pivot Shaft Oil Level - Check
980K Wheel Loader Electrohydraulic System MID 082 - CID 2113 - FMI 03
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
D6N Track-Type Tractor Recoil Spring Compartment Oil Level - Check
D6N Track-Type Tractor Winch Cable - Inspect
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information (Implement Hydraulic System)
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Brake Accumulator Charging Valve - Test
D11R and D11T Pinion and Bevel Gear History{3011, 3256} D11R and D11T Pinion and Bevel Gear History{3011, 3256}