2011/02/08 Caterpillar


New Product Link Cellular Is Released for All Cat Products {7606}

Usage:

769C 01X
Agricultural Tractor:
  • All
    Articulated Truck:
  • All
    Asphalt Paver:
  • All
    Backhoe Loader:
  • All
    Challenger:
  • All
    Cold Planer:
  • All
    Combine:
  • All
    Compact Wheel Loader:
  • ALL
    Earthmoving Compactor:
  • All
    Excavator:
  • All
    Integrated Toolcarrier:
  • All
    Landfill Compactor:
  • All
    Load Haul Dump:
  • All
    Mini Hydraulic Excavator:
  • All
    Motor Grader:
  • All
    Multi Terrain Loader:
  • All
    Off-Highway Truck/Tractor:
  • All
    Paving Compactor:
  • All
    Skid Steer Loader:
  • B Series
    Soil Compactor:
  • All
    Telehandler:
  • All
    Track Feller Buncher:
  • Caterpillar
    Track-Type Loader:
  • All
    Track-Type Skidder:
  • All
    Track-Type Tractor:
  • All
    Wheel Dozer:
  • All
    Wheel Loader:
  • All
    Wheel Skidder:
  • All
    Wheel Tractor-Scraper:
  • All
  • Service Magazine SEPD1236, 08 February 2011, "New Product Link Cellular Is Released for All Cat Products". Disregard the above referenced article. Refer to the following information.

    ReferenceOperation and Maintenance Manual, SEBU8142, "Product Link - 121SR/522/523".

    ReferenceSpecial Instruction, REHS2368, "Installation Procedure For Product Link PL522/523 (Cellular){7606}".

    ReferenceSystems Operation, RENR8143, "Product Link - PL522/523" for instructions to flash the gateway.

    New Cat Product Link has new user friendly web application and cellular technology. The VisionLink application will replace the current user interface for Product Link with intuitive tools, new hardware options, and features for processing and providing information to customers and dealers. The other features include: basic asset management, fleet monitoring, maintenance and health and utilization. The new generation of Product Link communicates over the cellular (GSM) network adding to the family of enabling hardware which uses satellite technology today. The primary advantage of the cellular (GSM) communication is the wider bandwidth which enables the signal to transfer more data more frequently.

    Note: Software updates for the master board are executed over the air by Trimble and cannot be flashed by the dealer at this time. Gateway flash file part numbers are: 371-5196 Monitor Software Gp (PL522 Gateway) and 371-5195 Monitor Software Gp (523 Gateway).

    Note: Prior to a service trip, be sure to check SIS Web to ensure that the new Flash File part number is still the latest Flash File part number. A newer Flash File part number may be available.

    Caterpillar Information System:

    300.9D and 300.9D VPS Mini Hydraulic Excavator Electrical Storm Injury Prevention
    349F and 352F Excavators Machine System Specifications Swing Motor
    CG137-08 and CG137-12 Industrial Engines Intake Manifold Air Temperature Is High
    CG137-08 and CG137-12 Industrial Engines Turbocharger Turbine Temperature Is High
    CG137-08 and CG137-12 Industrial Engines Spark Plug - Test
    C15 and C18 Petroleum Generator Sets Engine Valve Lash - Check
    CG137-08 and CG137-12 Industrial Engines Engine Cranks but Does Not Start
    C13 and C15 Generator Set Engines Air Inlet and Exhaust System - Inspect
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transfer Case Low Range Indicator and Wheel Locks Do Not Operate
    C6.6 Industrial Engine Exhaust Cooler (NRS) - Remove
    C6.6 Industrial Engine Exhaust Cooler (NRS) - Install
    349F and 352F Excavators Storage Box
    CG137-08 and CG137-12 Industrial Engines Oil Filter Differential Pressure Problem
    XQP150 Rental Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
    XQP150 Rental Generator Set Fuel System Secondary Filter - Replace
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transfer Case Detent Switch
    2011/02/15 A New Procedure is Now Used for Installing the Bearing Race in the Torque Converter Manifold for Certain CX Transmissions {3105}
    CG137-08 and CG137-12 Industrial Engines Compression - Test
    CG137-08 and CG137-12 Industrial Engines Engine Stalls Immediately After Starting
    CG137-08 and CG137-12 Industrial Engines Engine Oil Pressure - Test
    C4.4 Industrial Engine Maintenance Interval Schedule
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transfer Case Does Not Change Range
    C4.4 Industrial Engine Burn Prevention
    CG137-08 and CG137-12 Industrial Engines CAN Data Link - Test
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.