3512C and 3516C Marine Auxiliary and Generator Set Engines Caterpillar


Coolant Level - Check

Usage:

3512C 2A2

------ 警告! ------

欲觸及此維修點,可能需要攀爬設備。 如需安全資訊,請參閱操作與保養手冊, "上、下機器"
章節。


配備觀測計的引擎



插圖 1g00750429
(1) 加油蓋
(2) 觀測計

若引擎配備有觀測計,請觀察觀測計中冷卻液的位置。 在正常的工作溫度下,正確的冷卻液液位會在觀測計的上半部。 若冷卻液液位低,請添加正確的冷卻混合液。

未配備觀測計的引擎

------ 警告! ------

加壓系統: 高溫冷卻液會導致人員嚴重燙傷。 欲打開冷卻系統的加注口蓋,請停止引擎並等候冷卻系統的組件變冷。 緩慢鬆開冷卻系統壓蓋以釋放壓力。


在引擎熄火且冷卻後檢查冷卻液液位。

緩慢擰鬆冷卻系統加注口蓋,以釋放任何壓力。 將冷卻液維持在距離加注口管底部 13 mm (0.5 英寸)以內。

添加冷卻液

附註關於使用正確的冷卻混合液,請參閱本操作保養手冊, "用液建議"

  1. 關閉引擎。 等待引擎冷卻。

  2. 緩慢擰鬆冷卻系統加注口蓋,以釋放任何壓力。 將適當的冷卻混合液倒入加注口管。


    插圖 2g00103639
    墊片

  3. 清潔冷卻系統加注口蓋。 檢查冷卻系統加注口蓋的密封墊。 如果墊圈損壞,請將舊的冷卻系統加注口蓋更換為新的加注口蓋。 安裝冷卻系統加注口蓋。

  4. 啟動引擎。 檢查冷卻系統是否有洩漏。

Caterpillar Information System:

C13 and C15 Generator Set Engines Air Inlet and Exhaust System
PM3516 Power Modules Parallel Operation
UPSB505 Uninterruptible Power Supply Product Location
C280 Marine, Marine Auxiliary, and Petroleum Engines Control Panel - Inspect/Test
C13 and C15 Generator Set Engines Fuel System
2011/02/11 Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Control Panel
2011/02/09 New Configuration Feature for the Remote Advisor Panel for Some G3500 Petroleum Engines with NO<SUB>x</SUB> Feedback {1901, 1920}
C11 and C13 Industrial Engines Grounding Stud - Inspect/Clean/Tighten
UPSB505 Uninterruptible Power Supply Electrical Specification
CG137-08 and CG137-12 Industrial Engines Cylinder Liner Projection - Inspect
C11 and C13 Industrial Engines Engine Speed/Timing Sensor - Clean/Inspect
PM3516 Power Modules Battery Charger - Check
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines
345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
C32 Generator Set Plate Locations and Film Locations
CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Is High
345D, 349D and 349D2 Excavator Machine System Specifications Position Sensor (Stick)
CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Is Low
CG137-08 and CG137-12 Industrial Engines Inlet Air Is Restricted
CG137-08 and CG137-12 Industrial Engines Gas Pressure - Check and Adjust
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Model View Illustrations
3600 and C280 Diesel Engine Fluids Recommendations Specialty Lubricants
3600 and C280 Diesel Engine Fluids Recommendations Cold Weather Lubricants
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.