Control Panel - Inspect/Test
檢查儀表板狀況是否良好。 執行自我測試。 所有警告指示燈應亮起。 若有警告指示燈未亮起，請立即更換其燈泡。 若警報未響起，請檢查問題並加以排除。
檢查所有儀表的狀況。 若有儀表故障，請立即維修或更換。
在正常運轉期間請經常監視儀表。
將資料記錄於日誌中。 比對新資料與先前記錄的資料。 比對新資料與已記錄的資料，有助於建立引擎性能的趨勢。 儀表讀數異常可能代表操作上有問題或運轉有問題。
Caterpillar Information System:
C13 and C15 Generator Set Engines Fuel System
2011/02/11 Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Control Panel
2011/02/09 New Configuration Feature for the Remote Advisor Panel for Some G3500 Petroleum Engines with NO<SUB>x</SUB> Feedback {1901, 1920}
C11 and C13 Industrial Engines Grounding Stud - Inspect/Clean/Tighten
UPSB505 Uninterruptible Power Supply Electrical Specification
CG137-08 and CG137-12 Industrial Engines Cylinder Liner Projection - Inspect
C11 and C13 Industrial Engines Engine Speed/Timing Sensor - Clean/Inspect
CG137-08 and CG137-12 Industrial Engines Main Bearings - Inspect
C4.4 Industrial Engine Temperature Sensor (DPF Inlet)
C4.4 Industrial Engine Diesel Particulate Filter
2011/01/27 A New Pressure Regulating Valve Is Used for Air Starting on some 3500B Marine Engines {108A, 1462}
UPSB505 Uninterruptible Power Supply Product Location
PM3516 Power Modules Parallel Operation
C13 and C15 Generator Set Engines Air Inlet and Exhaust System
3512C and 3516C Marine Auxiliary and Generator Set Engines Coolant Level - Check
PM3516 Power Modules Battery Charger - Check
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines
345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
C32 Generator Set Plate Locations and Film Locations
CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Is High
345D, 349D and 349D2 Excavator Machine System Specifications Position Sensor (Stick)
CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Is Low
CG137-08 and CG137-12 Industrial Engines Inlet Air Is Restricted