- Caterpillar Products
- Machines with Grease Lubricated Track with Swage
- Machines with Greased Lubricated Track (GLT)
- Machines with Positive Pin Retention (PPR) Track
- Machines with Positive Pin Retention 2 (PPR2) Track
- Machines with Rotating Bushing Track
- Machines with Sealed Positive Pin Retention (PPR) Track
- Machines with Sealed Track
- Machines with Sleeve Bearing Track
- Machines with SystemOne Undercarriage
- Machines with non-PPR Sealed and Lubricated Track
- Machines with Greased Lubricated Track (GLT)
- Track Drills
- MD5150C (S/N: SEY1-UP)
Introduction
Summary of Changes SEBF8530 | |
Revision | Changes |
26 | Added serial number prefixes for New Product Introduction |
25 | Added serial number prefixes for New Product Introduction |
24 | Added web links for undercarriage training videos.
Added serial number prefixes for New Product Introduction. |
23 | Added serial number prefixes for New Product Introduction.
Updated introduction information. |
© 2019 Caterpillar All Rights Reserved. This guideline is for the use of Caterpillar dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law. Information contained in this document is considered Caterpillar: Confidential Yellow.
This Undercarriage Reconditioning Bulletin contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Undercarriage Reconditioning Bulletin must be used with the latest technical information that is available from Caterpillar.
For technical questions when using this document, work with your Dealer technical Communicator (TC).
To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.
Written Documentation
The written documentation is available to provide written and illustrated instructions on common undercarriage reconditioning practices. Along with the many bulletins provided in the Undercarriage Reconditioning Guide, all the current wall charts are also included.
Reference: Undercarriage Reconditioning Guide, SEBF8599
Wall Charts
Wall charts are designed to provide guided instructions, useful tooling, and proper dimensions while the worker is performing a reconditioning procedure. These wall charts should hang in the dealer shop where the wall charts can be utilized during all service procedures.
Reference: Wall Chart, SENR1788, "Non-Positive Pin Retention (PPR) Sealed and Lubricated Track Reconditioning"
Reference: Wall Chart, SENR1838, "PPR Sealed and Lubricated Track Reconditioning"
Reference: Wall Chart, RENR2052, "Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals"
Reference: Wall Chart, RENR2059, "Disassembly and Assembly Procedures for Rollers with Inverted Duo-Cone Seals"
Reference: Wall Chart, RENR3960, "Disassembly and Assembly Procedures for Idlers with Conventional Duo-Cone Seals"
Reference: Wall Chart, RENR3961, "Disassembly and Assembly Procedure for Track Rollers with Conventional Duo-Cone Seals"
Reference: Wall Chart, RENR3962, "Disassembly and Assembly Procedures for Snap Ring and Oval Track Rollers"
Reference: Wall Chart, RENR7061, "Set-Up and Use of the Caterpillar Test and Fill Machine"
Reference: Wall Chart, RENR3963, "Disassembly and Assembly Procedures for Hydraulic Excavator Rollers"
Reference: Wall Chart, RENR3964, "Disassembly and Assembly Procedures for Hydraulic Excavator Idlers"
Reference: Wall Chart, RENR3965, "Adjustment, Setup, and Operation Procedures for the Caterpillar Track Torque Wrench"
Note: All the above wall chart media are included with the Undercarriage Reconditioning Guide except the media RENR7061.
Videotapes
Videotapes are valuable for teaching basic information to new employees. Videotapes can be used for group or individual training.
Reference: Video, PEVN4322, "Track Shop Servicing Procedure for Non-PPR Sealed and Lubricated Track"
Reference: Video, SEVN4502, "Duo-Cone Seals"
Reference: Video, PEVN4776, "Undercarriage Test and Fill Machine"
Note: Videotapes media number will be available on the Global Sales Library.
CD
CD presentations can be used for customer presentation or self-study. Critical undercarriage components and how the components work as a system are reviewed.
Reference: CD, TERP1001, "Undercarriage Works and Wears Simulator"
Note: CD media number will be available in Media Logistics or the Caterpillar Online Ordering System. Some media is in transition to the new website. If you are unable to locate the media, you need to refer to the following sites.
Media Logistics
- Dealers access via: http://logistics-cf.cat.com/media/dealers/extranet.cfm
- Internal customers can access this site: http://logistics-cf.cat.com/media/internal/index.cfm
Caterpillar Online Ordering System
- Internal and Dealers access: https://oos.midlandcorp.com/cat/
For temporary ordering assistance during the media transition, Caterpillar Media Logistics personnel will be available during Media Logistics business hours, 7:30am to 4:30pm CST Monday through Friday, at: media_logistics@cat.com
For additional assistance in locating media, contact the following email address: research_media@cat.com