C15 and C18 Tier 4 Final Engines Caterpillar


ARD Fuel System - Flush

Usage:

826K 232


注意

更换 ARD 燃烧盖或燃油控制阀时,需要更换 ARD 歧管上的直列式燃油滤清器接头组件。

重要注意事项:接头的螺纹上请勿使用防粘结剂或任何其他物质。


  • 拆下先导和主(如有配备)燃油管。



      图 1g01910214

      ARD 盖

      (1) 先导直列式滤清器接头

      (2) 主直列式滤清器接头(如有配备)

    1. 将一条 4 ft 的 5P-0767 软管 和一个 5D-1026 软管卡箍 连接到各燃油管。



      图 2g01910098

      连接两段软管的位置

    1. 将软管引入至少能容纳 3 gal 燃油的经过认可的容器中,以便盛接排出的燃油。

      注: 此步骤中将会排出 2 至 3 gal 的燃油。 确保用于盛接燃油的容器尺寸足够。

    1. 选择 "ARD Fuel Line Flush(ARD 燃油管冲洗)"维修测试。 "ARD Fuel Line Flush(ARD 燃油管冲洗)"在 5 分钟内完成。

    1. 将燃油管安装到 ARD 燃烧盖上。

      管两端的接头的正确扭矩如下:

      先导燃油管接头 ... 11 ± 2 N·m (97 ± 18 lb in)

      主燃油管接头 ... 16 ± 2 N·m (142 ± 18 lb in)

  • Caterpillar Information System:

    C27 Generator Set Plate Locations and Film Locations
    C13 and C15 On-highway Engines Engine Shutdown Occurs Intermittently
    349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control: Parameter Adjustment
    349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control: Parameter Setting
    C15 and C18 Engines Belts - Inspect/Replace - If Equipped
    3516C Locomotive Engines Exhaust Manifold - Remove and Install
    349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Process for Setting Up the Work Tool
    2010/11/30 A New Muffler Assembly Prevents Exhaust Gas Recirculation on Certain 345D Excavators and Mobile Hydraulic Power Units {1062}
    C27 and C32 Industrial Engines Engine Oil Filter Base - Remove and Install
    2010/11/29 Retrofitting for Ultra Lean Burn on a G3516 Engine {1000, 775E}
    C15 and C18 Engines Safety Messages
    349F and 352F Excavators Hydraulic System Work Tool Parameter - Program
    2010/10/18 A New Bushing Is Used for Front Gear Train Adapters in C175-16 Generator Set Engines {1151, 1162, 1206, 7551}
    320 VH and VM Variable Gauge Undercarriage Undercarriage Cylinder (Adjustable Gauge) - Remove and Install - VM Undercarriage
    320 VH and VM Variable Gauge Undercarriage Undercarriage Frame (Adjustable Gauge) - Remove and Install - VM Undercarriage
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System System Schematic
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Output Components
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Determining Diagnostic Trouble Codes
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Diagnostic Trouble Code List
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transmission, SPN 126 - FMI 16
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transmission, SPN 126 - FMI 3
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transmission, SPN 158 - FMI 2
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transmission, SPN 161 - FMI 8
    CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transmission, SPN 168 - FMI 3
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.