Component Location
Show/hide table
| |
| Illustration 1 | g02278193 |
Block diagram for the C32 Engines
Locations of the Engine Electronic Components
Show/hide table
| |
| Illustration 2 | g02279617 |
|
Left side engine view (1) Electronic Control Module (ECM) (2) NRS temperature sensor (3) Differential pressure sensor for the NRS system (4) Absolute pressure sensor for the NRS system (5) Engine oil pressure sensor (6) Crankshaft speed/timing sensor (7) Buffer for the exhaust temperature sensors (8) Low oil level switch (engine off) (9) Turbocharger inlet temperature sensor for cylinders 1, 3, and 5 (10) Turbocharger inlet temperature sensor for cylinders 7, 9, and 11 | |
Show/hide table
| |
| Illustration 3 | g02280594 |
|
Right side engine view (11) Solenoid for NRS actuator (12) Camshaft speed/timing sensor (13) Turbocharger inlet temperature sensor for cylinders 8, 10, and 12 (14) Turbocharger inlet temperature sensor for cylinders 2, 4, and 6 (15) Buffer for the exhaust temperature sensors (16) Coolant flow switch | |
Show/hide table
| |
| Illustration 4 | g02280596 |
|
Top engine view (17) Valve cover connector for fuel injectors (left bank) (18) Valve cover connector for fuel injectors (right bank) (19) Balance valve solenoid (20) Right intake manifold temperature sensor (21) Left intake manifold temperature sensor (22) Crankcase pressure sensor (23) Intake manifold pressure sensor (24) J2/P2 ECM connectors (25) J1 ECM connector (26) Barometric pressure sensor (27) Coolant temperature sensor (28) Fuel temperature sensor (29) Fuel filter differential pressure switch (30) Fuel pressure sensor | |
Show/hide table
| |
| Illustration 5 | g02280597 |
|
Location of the turbocharger inlet sensors (left side view of the machine) (31) Turbocharger inlet pressure sensor (32) Air inlet temperature | |
Show/hide table
| |
| Illustration 6 | g02280599 |
|
Location of the fuel priming pump (right side view of the machine) (33) Fuel priming pump | |
Show/hide table
| |
| Illustration 7 | g02281474 |
|
Fuse block (machine cab view) | |
Show/hide table
| |
| Illustration 8 | g02280598 |
|
Location of the ether solenoid (right side view of the machine) (34) Ether solenoid | |
Show/hide table
| |
| Illustration 9 | g02280600 |
|
Location of the fan reversing solenoid and the fan bypass solenoid (front machine view) (35) Hydraulic fan motor (36) Fan reversing solenoid (37) Fan bypass solenoid | |
Show/hide table
| |
| Illustration 10 | g02280613 |
|
Location of the hydraulic demand fan pump (left rear engine view) (38) Hydraulic demand fan pump (39) Demand fan solenoid | |
Show/hide table
| |
| Illustration 11 | g02280993 |
|
Location of the prelube pump (left side machine view) (40) Prelube pump | |
Caterpillar Information System:
2010/12/06 A New Throttle Actuator Is Used for Some G3500 and G3500B Engines {1265, 1716}
C27 and C32 Engines for Caterpillar Built Machines Configuration Parameters
(Custom) Pipe and Pole Forks Daily Inspection
D8T Track-Type Tractor Machine Systems Implement Control Valve - Assemble
D6N Track-Type Tractor Operation Information
Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610} Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610}
D11T Track-Type Tractor Power Train Data Link
320E and 323E Excavators Machine System Specifications Refrigerant Compressor
966K XE Wheel Loader Machine Systems Piston Pump (Brake, Pilot, Fan) - Disassemble
D6N Track-Type Tractor Monitoring System
966K XE Wheel Loader Machine Systems Piston Pump (Brake, Pilot, Fan) - Assemble
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
C6.6 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
2010/12/24 New Relief Valve Groups Are Now Used for the Bucket Tilt on Certain Wheel Loaders {5051}
966K XE Wheel Loader Steering System Secondary Steering Pump and Electric Motor
966K Wheel Loader and 972K Wheel Loader Steering System Secondary Steering Valve
854K Wheel Dozer and 992K Wheel Loader Engine and Torque Converter - Remove
966K XE Wheel Loader Power Train Pump and Motor - Remove and Install
Cat® Grade Control for Wheel Tractor Scrapers Configuration
C9.3 Tier 4 Final Engines Turbocharger
950K and 962K Wheel Loaders Power Train Differential and Final Drive Troubleshooting
966M and 972M Wheel Loaders Machine Preparation for Troubleshooting
950K and 962K Wheel Loaders Power Train Torque Converter Troubleshooting
950K and 962K Wheel Loaders Power Train Transmission Speed for Forward Directional Shift - Program