Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Intake
Removal Procedure
- Disconnect harness assembly (1) and remove NRS Intake Pressure sensor (2) .
Show/hide table
 | |
| Illustration 1 | g02276136 |
Installation Procedure
- Install the NRS Intake Pressure sensor (2) in the reverse order.
- Tighten NRS Intake Pressure sensor (2) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
Caterpillar Information System:
C7.1 Industrial Engine Relief Valve (Fuel) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines ECM Does Not Communicate with Other Modules
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Medium Pressure: Default Value of Work Tool Parameters
C6.6 Industrial Engine Water Separator and Fuel Filter (Primary) - Remove and Install
2010/12/13 A New Bolt Is Now Used to Secure the Rocker Arm Shaft on Certain C27 and C32 Engines {1102, 1123, 1292, 7553}
C6.6 Industrial Engine Flow Control Valve - Remove and Install
A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160} A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160}
826K Landfill Compactor Severe Service Application
C13 Industrial Engine Product Description
C1.5 and C2.2 Industrial Engines Fan Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Differential Pressure
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Pilot Pressure Limit
C1.5 and C2.2 Industrial Engines Safety Messages
C1.5 and C2.2 Industrial Engines Model View Illustrations - Engines and Aftertreatment
3306B Generator Set Product Lifting
2010/12/06 A New Throttle Actuator Is Used for Some G3500 and G3500B Engines {1265, 1716}
C1.5 and C2.2 Industrial Engines Engine Electronics
C6.6 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
C9.3 Tier 4 Final Engines Turbocharger
D6T Track-Type Tractor Engine Air Precleaner - Clean
12M Motor Grader Engine Starting
C1.5 and C2.2 Industrial Engines Emissions Certification Film