Crankcase Pressure Sensor - Remove and Install
- Disconnect harness assembly (3).
- Remove bolt (1) and remove crankcase pressure sensor (2). Remove the O-ring seals.
Show/hide table
| |
| Illustration 1 | g02255213 |
|
View of the front left side of the engine, near the engine control module. | |
- Install crankcase pressure sensor (2) in reverse order of removal.
Caterpillar Information System:
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Condenser
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Compressor
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
3500 Engines Aftercooler - Remove and Install
2010/09/14 New O-Rings Are Used with the Plugs for the Fuel Passages in 3500 Engines {1100, 1101, 1252, 1254}
C27 and C32 Generator Set Engines Vibration Damper and Pulley
G3516 TA Engine System Overview
G3520E Generator Set Engines System Overview
XQ Auto Paralleling Maintenance Interval Schedule
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator
G3520E Generator Set Engines Electrical Connectors
C27 and C32 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
2010/10/18 Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371} Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371}
3500 Engines Air Shutoff - Remove and Install
2010/12/13 An Improved Plate Gasket Is Used Between the Spacer Plate and the Cylinder Block on Certain C27 and C32 Engines {1201, 7555}
3500 Engines Engine Oil Pressure Sensor - Remove and Install
3500 Engines Turbocharger Inlet Pressure Sensor - Remove and Install
3500 Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3500 Engines Coolant Temperature Sensor - Remove and Install
3500 Engines Aftercooler Coolant Temperature Sensor - Remove and Install
3500 Engines Atmospheric Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Solenoid Valve (Exhaust Balance) - Remove and Install
2010/10/08 Discontinued, Genuine Cat Parts Now Available From Vintage Parts , Inc. At Your Cat Dealers {1000, 7000}