Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
拆卸步骤
- 断开软管组件 (1) 和 (2) 。
Show/hide table
 | |
| 图 1 | g02252733 |
- 拆下螺栓 (4) 并将歧管 (3) 放到一边。
- 拆下螺栓 (5) ，然后拆下支架 (6) 。
- 断开线束组件 (7) ，然后拆下进气温度传感器 (8) 。
Show/hide table
 | |
| 图 2 | g02254853 |
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 按照相反顺序安装进气温度传感器 (8) 。
- 将进气温度传感器 (8) 拧紧至扭矩为 20 ± 3 N·m (177 ± 27 lb in)。
Caterpillar Information System:
3500 Engines Aftercooler - Remove and Install
2010/09/14 New O-Rings Are Used with the Plugs for the Fuel Passages in 3500 Engines {1100, 1101, 1252, 1254}
C27 and C32 Generator Set Engines Vibration Damper and Pulley
G3516 TA Engine System Overview
G3520E Generator Set Engines System Overview
XQ Auto Paralleling Maintenance Interval Schedule
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator
G3520E Generator Set Engines Electrical Connectors
C27 and C32 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000} Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System
C15 and C18 Tier 4 Final Engines Electrical System
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Compressor
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Condenser
C27 and C32 Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install
2010/10/18 Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371} Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371}
3500 Engines Air Shutoff - Remove and Install
2010/12/13 An Improved Plate Gasket Is Used Between the Spacer Plate and the Cylinder Block on Certain C27 and C32 Engines {1201, 7555}
3500 Engines Engine Oil Pressure Sensor - Remove and Install
3500 Engines Turbocharger Inlet Pressure Sensor - Remove and Install
3500 Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3500 Engines Coolant Temperature Sensor - Remove and Install
3500 Engines Aftercooler Coolant Temperature Sensor - Remove and Install