Boost Pressure Sensor - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect hose assemblies (1) and (2).
- Remove bolts (4) and position manifold (3) out of the way.
- Remove bolts (5) and remove bracket (6).
Show/hide table
Illustration 2 g02253875 - Disconnect harness assembly (8) and remove boost pressure sensor (7).
Show/hide table
Illustration 1 | g02252733 |
- Install the boost pressure sensor (7) in the reverse order.
- Tighten boost pressure sensor (7) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
Caterpillar Information System:
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000} Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System
C15 and C18 Tier 4 Final Engines Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 General Information
C4.4 (Mech) Marine Generator Set MCS-3 Fuel System - Prime - Duplex Fuel Filter if Equipped
C3.4B Engines Diagnostic Trouble Codes
C32 Power Module Maintenance Interval Schedule - Standby
C32 Power Module Maintenance Interval Schedule - Prime Power
C9 Generator Set Engine Oil and Filter - Change
3512C HD Locomotive Engine Overhaul (Top End)
C9 Generator Set Configuration Parameters
3512C HD Locomotive Engine Maintenance Recommendations
G3520E Generator Set Engines Electrical Connectors
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator
XQ Auto Paralleling Maintenance Interval Schedule
G3520E Generator Set Engines System Overview
G3516 TA Engine System Overview
C27 and C32 Generator Set Engines Vibration Damper and Pulley
2010/09/14 New O-Rings Are Used with the Plugs for the Fuel Passages in 3500 Engines {1100, 1101, 1252, 1254}
3500 Engines Aftercooler - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Compressor
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Condenser
C27 and C32 Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install