XQ Auto Paralleling Caterpillar


Burn Prevention

Usage:

PMG3516 KAD

Coolant

At operating temperature, the engine coolant is hot and the engine coolant is under pressure. The radiator and all lines to heaters or to the engine contain hot coolant or steam. Any contact can cause severe burns.

Steam can cause personal injury.

Only check that the coolant level after the engine has been stopped. Make sure that the radiator cap is cool. In order to remove the radiator cap with the bare hand, the radiator cap must be cool. In order to relieve pressure, remove the radiator cap slowly.

Cooling system conditioner contains alkali. Alkali can cause personal injury. Do not allow alkali to contact the skin, the eyes, or the mouth.

Allow cooling system components to cool before draining.

Oils

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.

Remove the cap for the makeup tank after the engine has stopped. The filler cap must be cool to the touch.

Relieve all of the pressure in any system (air systems, oil systems, fuel systems, or cooling systems) before any system components are disconnected.

Batteries

Batteries give off flammable fumes which can explode.

Do not smoke when observing the battery electrolyte levels.

The liquid in a battery is an electrolyte. Electrolyte is an acid. Electrolyte can cause personal injury. Do not allow electrolyte to contact the skin or the eyes.

Always wear protective glasses when you work with batteries.

Caterpillar Information System:

XQ Auto Paralleling General Hazard Information
XQ Auto Paralleling Engine Starting
XQ Auto Paralleling Fire Prevention and Explosion Prevention
XQ Auto Paralleling Engine Stopping
3516C Locomotive Engines Selective Catalytic Reduction Module - Assemble
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C3.4B Engines Engine Overspeeds
C27 and C32 Engines for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
312F and 313F Excavators Fumes Disposal Filter Element - Replace
Replacing the High Pressure Fuel Pump on Certain C7 and C9 Engines{1251, 1714} Replacing the High Pressure Fuel Pump on Certain C7 and C9 Engines{1251, 1714}
C3.4B Engines Engine Has Early Wear
320E and 323E Excavators Fuel System Primary Filter (Water Separator) Element - Replace
XQ Auto Paralleling Before Starting Engine
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System General Information
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805} Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
C3.4B Engines Fuel Rail Pressure Problem
C3.4B Engines Intake Manifold Air Pressure Is High
Packaging Instructions for a Diesel Particulate Filter (DPF) Core Return for Certain Non-Road Applications{108F} Packaging Instructions for a Diesel Particulate Filter (DPF) Core Return for Certain Non-Road Applications{108F}
C15 and C18 Engines for Caterpillar Built Machines Alternator and Regulator
Incorrect Torquing on Water Pump Groups for Certain C-10 and C-12 Engines{1361, 7553} Incorrect Torquing on Water Pump Groups for Certain C-10 and C-12 Engines{1361, 7553}
C3.4B Engines Intake Manifold Air Pressure Is Low
C3.4B Engines Intake Manifold Air Temperature Is High
C7.1 Industrial Engine Turbocharger - Inspect - Series Turbochargers
C15 and C18 Engines for Caterpillar Built Machines Air Cleaner
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.