312F and 313F Excavators Caterpillar


Belt - Inspect/Adjust/Replace

Usage:

313F L DJE
Megjegyzés A motor ékszíj-feszítővel van felszerelve, amely automatikusan a helyes értékre állítja be az ékszíj feszességét.

  1. Nyissa ki, majd emelje fel a motortér fedelét.


    Illusztráció 1g06114636
    (A) Új hajtószíj
    (B) Kopott hajtószíj

  2. Vizsgálja meg a csigaszíj állapotát. Idővel a hajtószíj bordáinak anyaga (C) megkopik. A bordák közötti terület megnő (D). Az anyag kopása azt eredményezi, hogy a szíjtárcsa hozzáér a hajtószíj hornyaihoz. Ez a hajtószíj csúszásához és megnövekedett mértékű kopáshoz (E) vezet. Cserélje le a szíjat, ha kopott vagy kirojtosodott.

  3. Ha az ékszíjat le kell cserélni, végezze el a 3.a - 3.f lépésekben leírt műveleteket.

    1. Vegye le a felső ventilátorvédőt.


      Illusztráció 2g02239073

    2. Forgassa a szíjfeszítőt az óramutató járásával megegyező irányban a szíj leszereléséhez.

    3. Távolítsa el az ékszíjat.

    4. Tegyen fel új szíjat.

    5. Forgassa a szíjfeszítőt az óramutató járásával megegyező irányban a szíj felszereléséhez.

    6. Tegye vissza a felső ventilátorvédőt.

    7. Engedje le, majd reteszelje a motortér fedelét.

Caterpillar Information System:

3306B Generator Set Safety Messages
3306B Generator Set Generator Bearing Temperature - Measure/Record
3500B Generator Sets Generator Bearing - Lubricate
3306B Generator Set Alternator and Fan Belts - Inspect/Adjust/Replace
3306B Generator Set Generator Bearing - Inspect
3306B Generator Set Refill Capacities and Recommendations
793F and 797F Off-Highway Trucks Chassis Electronic Control System Backlight Does Not Illuminate
C3.4B Engines Diesel Particulate Filter Collects Excessive Soot
C3.4B Engines Coolant Level Is Low
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300} Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
C15 and C18 Engines Product Lifting
2011/03/16 A New Cylinder Head Gasket and Spacer Plate Are Used for 3500 Machine Engines {1100, 1201, 7555}
C27 and C32 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install
3512B Petroleum Engines with the ADEM 2 Electronic Control Module E012 High Crankcase Pressure Derate
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Basic Preventive Maintenance
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Advanced Preventive Maintenance
C3.4B Engines Diesel Particulate Filter Temperature Is Low
120 and 120 AWD Motor Grader Braking System - Test
793F and 797F Off-Highway Trucks Chassis Electronic Control System Backlight Is On Continuously
Retrofitting for Ultra Lean Burn (ULB) on Certain G3516 Engines{1000, 775E} Retrofitting for Ultra Lean Burn (ULB) on Certain G3516 Engines{1000, 775E}
312F and 313F Excavators Engine Oil Level - Check
C27 and C32 Industrial Engines Exhaust Gas Valve (NRS) - Remove and Install
320E and 323E Excavators Fuel System Primary Filter (Water Separator) Element - Replace
C3.4B Engines Engine Has Early Wear
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.