Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300} Caterpillar


Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}

Usage:

MT700 018

Information for equipment:


BRAKING SYSTEM
BRAKE GP

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251} Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300} Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}


Agricultural Tractor
All
Articulated Truck
All
Compact Wheel Loader
All
Earthmoving Compactor
All
Integrated Toolcarrier
All
Landfill Compactor
All
Motor Grader
All
Off-Highway Truck/Tractor
All
Pipelayer
All
Soil Compactor
All
Track-Type Loader
All
Track-Type Skidder
All
Track-Type Tractor
All
Wheel Dozer
All
Wheel Feller Buncher
All
Wheel Loader
All
Wheel Skidder
All
Wheel Tractor-Scraper
All

Introduction

Table 1
Revision  Summary of Changes in SEBF8321 
16  Added serial numbers prefixes for NPI. Formatted tables and removed media that is no longer available. 
15  Added serial numbers prefixes for NPI, removed references to former subscription SEBF8318 
14  Added new serial number prefixes for New Product Introduction (NPI).
Updated copyright date to 2018.
Removed old point of contacts.
Added new point of contact. 
13  Updated referenced material. 
12  Removed Table 7. 

© 2018 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.

Information contained in this document is considered Caterpillar: Confidential Yellow.

This Reuse and Salvage Guideline contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.

For technical questions when using this document, work with your Dealer Technical Communicator (TC).

To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.

Final Drive

Table 2
Media Number  Publication Type & Title 
REHS0717  Special Instruction
"Removal and Installation of the Differential and Bevel Gear Group and the Final Drive and Wheel Group Assemblies for the 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793, 793B and 793C Off-Highway Truck/Tractor" 
SEBF8078  Reuse and Salvage Guidelines
"Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders" 
SEBF8079  Reuse and Salvage Guidelines
"Reusability of Planetary Final Drive Components for Track-Type Tractors" 
SEBF8083  Reuse and Salvage Guidelines
"Inspection and Salvage of Wheel Spindles for All Off-Highway Trucks" 
SEBF8084  Reuse and Salvage Guidelines
"Procedure to Repair Damaged Sprocket Hubs for D8L, D8N, D9L, D9N, D10N, and D11N Tractors" 
SEBF8090  Reuse and Salvage Guidelines
"Wheel Loader Power Train Specifications: 966C, 966D, 980C, 988B, 992B, 992C" 
SEBF8093  Reuse and Salvage Guidelines
"Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, and Underground Articulated Trucks" 
SEBF8123  Reuse and Salvage Guidelines
"Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines" 
SEBF8132  Reuse and Salvage Guidelines
"Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors" 
SEBF8135  Reuse and Salvage Guidelines
"Repair Of Web Cracks In Final Drive Planetary Carriers" 
SEBF8163  Reuse and Salvage Guidelines
"Procedures to Salvage Thrust Faces on Planetary Carriers" 
SEBF8168  Reuse and Salvage Guidelines
"Salvage of Final Drive Carrier Plate for Track-Type Loaders" 
SEBF8182  Reuse and Salvage Guidelines
"Salvage and Reuse of Final Drive Axle Bearings Used in 769 to 797 Off-Highway Trucks/Tractors and 990, 992, and 994 Wheel Loaders" 
SEBF8183  Reuse and Salvage Guidelines
"Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders" 
SEBF8185  Reuse and Salvage Guidelines
"Salvage Procedure for Final Drive Planet Gear Used in Off-Highway Trucks" 
SEBF8190  Reuse and Salvage Guidelines
"Reusability of Tapered Bearings" 
SEBF8193  Reuse and Salvage Guidelines
"Reusability of Drive Train Gears" 
SEBF8221  Reuse and Salvage Guidelines
"Salvage of Planetary Carrier (Outer Pin Bore) Using Pressed In Sleeves for 785 and 789 Trucks" 
SEBF8222  Reuse and Salvage Guidelines
"Salvage of Planetary Carrier Pin Bores Using Tapered Roller Bearings for 785 and 789 Trucks" 
SEBF8223  Reuse and Salvage Guidelines
"Salvage of Inner Planetary Carrier Pin Bores Using Tapered Roller Bearings for 785, 789, and 793 Trucks" 
SEBF8225  Reuse and Salvage Guidelines
"Reusability of Final Drive Splines on 785, 789, 793, and 797 Off-Highway Trucks" 
SEBF8252  Reuse and Salvage Guidelines
"Installing Tapered Roller Bearings in 6G-6352 Planetary Gears in Final Drives of Off- Highway Trucks" 
SEBF8285  Reuse and Salvage Guidelines
"Salvage of Outer Planetary Carrier Pin Bores, Using Metal Spray and Machining Operations for 793 Off-Highway Trucks" 
SEBF8419  Reuse and Salvage Guidelines
"Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders" 
SEBF8752  Reuse and Salvage Guidelines
"Off-Highway Truck Final Drive Planetary Carrier" 
SEBF8759  Reuse and Salvage Guidelines
"Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks" 
SEBF8841  Reuse and Salvage Guidelines
"Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers" 
SEBF9239  Reuse and Salvage Guidelines
"Spherical Roller Bearing and Wear Plate Inspection" 
SEBF9306  Reuse and Salvage Guidelines
"Procedure to Remove and Install Sleeve Bearings in the Rear Auxiliary Drive Group used in D11 Track Type Tractors" 
SEBF9309  Reuse and Salvage Guidelines
"Inspection and Salvage of Front Wheel Spindles for Off-Highway Trucks" 
SEBF9317  Reuse and Salvage Guidelines
"Reusability Guidelines & Crack Inspection for Front & Rear Wheel Spindles on 16 & 24 Motor Graders Used in Mining Applications" 
SEBF9351  Reuse and Salvage Guidelines
"Reuse & Salvage on 795F AC/XQ Wheel Motor" 
SEBF9355  Reuse and Salvage Guidelines
" 286-8076 Spindle Counter Bore Repair at Mid Support Bearing Housing" 
SMHS7534  Special Instruction
"Installation Of Motor Grader Tandem Oscillation Seal Groups" 

Suspension and Steering System

Table 3
Media Number  Publication Type & Title 
REHS2099  Reuse and Salvage Guidelines
"Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks" 
REHS2110  Reuse and Salvage Guidelines
"Center Steering Arm Straight Bore Inspection and Salvage Procedure for Off-Highway Trucks" 
SEHS8757  Special Instruction
"Repair Procedure for Bladder Type Accumulators for Off-Highway Truck/Tractor" 
SEBF8159  Reuse and Salvage Guidelines
"Front Suspension Cylinder Rods for 789 Trucks" 
SEBF8194  Reuse and Salvage Guidelines
"Specifications for Rear Suspension Cylinder Components Used in Off-Highway Trucks" 
SEBF8271  Reuse and Salvage Guidelines
"Salvage of Tapered Steering Bores" 
SEBF8401  Reuse and Salvage Guidelines
"Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders" 
SEBF8420  Reuse and Salvage Guidelines
"Rebuilding Front Axles, Spindle Housings Leaning Arms and Lean Bars" 
SEBF8879  Reuse and Salvage Guidelines
"Repair/Replace Large OHT Body Pivot Bores and Suspension Bores" 
SEBF8880  Reuse and Salvage Guidelines
"797 OHT Front Axle Steering Arm Bolt Hole Repair" 
SEBF9161  Reuse and Salvage Guidelines
"Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders" 
SEBF9166  Reuse and Salvage Guidelines
"Repair of Front Strut Support for Off-Highway Trucks" 
SEBF9400  Reuse and Salvage Guidelines
"Reuse & Salvage Procedure for Off-Highway Truck Accumulators" 
SMHS7827  Special Instruction
"Modification of Steering Clutch Control Valves" 

Steering Clutches and Filtering

Table 4
Media Number  Publication Type & Title 
SEBF8158  Reuse and Salvage Guidelines
"Steering Clutch and Brake Discs and Plates for Scrapers, Pipelayers, Track-Type Tractors, and Loaders" 
SEBF8455  Contamination Control Guidelines
"Procedure for Filtering Hydraulic Oil in Track-Type Tractors & Pipelayers" 
SEBF8465  Contamination Control Guidelines
"Procedure for Filtering Transmission Oil in D6 - D11 Track-Type Tractor" 

Braking System

Table 5
Media Number  Publication Type & Title 
SEBF8037  Reuse and Salvage Guidelines
"Brake Drums for Off-Highway Trucks, Tractors, and Scrapers" 
SEBF8056  Reuse and Salvage Guidelines
"Brake Drums For Track-Type Tractors and Loaders" 
SEBF8095  Reuse and Salvage Guidelines
"Service Brakes for Off-Highway Trucks and Tractors" 
SEBF8199  Reuse and Salvage Guidelines
"Salvage of Brake Housings Used on Off-Highway Trucks" 
SEBF8834  Reuse and Salvage Guidelines
"Brake Clutch Discs and Plates Using Extended Life Friction Material" 
SEBF9356  Reuse and Salvage Guidelines
"Rework of Brake Group for Off-Highway Trucks" 
SEHS9103  Special Instruction
" 8R-2578 Master Cylinder Booster (Power Cylinder) Repair Kit" 
SEHS9104  Special Instruction
" 8R-1433 Master Cylinder Repair Kit" 
SEHS9143  Special Instruction
"Burnishing the Secondary Brake Shoes" 
SEHS9187  Special Instruction
"Brake Linings Require Conditioning On Machines With Drum Brakes" 

Wheels and Tires

Table 6
Media Number  Publication Type & Title 
SEBF8120  Reuse and Salvage Guidelines
"Repair of Worn Wheel Stud Holes on 992C and 992D Wheel Loaders" 
SEBF8122  Reuse and Salvage Guidelines
"Procedure for Repairing Wheel Rims for Off-Highway Trucks" 
SEBF8334  Reuse and Salvage Guidelines
"Installing New Tapered Roller Bearings in Wheel Assemblies on 793 Off-Highway Trucks" 
SEBF8443  Reuse and Salvage Guidelines
"Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks" 
SEBF8490  Contamination Control Guidelines
"Cleaning Front Wheel Groups of 793, 795, and 797 Off-Highway Trucks" 
SEBF8958  Reuse and Salvage Guidelines
"Inspection and Repair Procedure for Wheels that are Used on 992, 993K, and 994 Wheel Loaders" 
SEBF9118  Reuse and Salvage Guidelines
"Procedure to Remove Large Wheel Bearing Cups" 
SEBF9135  Reuse and Salvage Guidelines
"Inspection of Rim Assemblies of Off-Highway Trucks" 
SEBF9138  Reuse and Salvage Guidelines
"797 Rear Wheel Bearing Full Second Life Reusability Guidelines" 
SEBF9368  Reuse and Salvage Guidelines
"Procedure to Inspect and Repair 266-3613 & 309-4130 Front Wheel on Off-Highway Truck" 
SEBF9380  Reuse and Salvage Guidelines
"Rear Wheel Reuse and Salvage Inspection Guide for 795F & 797" 
SEBF9383  Reuse and Salvage Guidelines
"Repair of 282-6634 Wheel Adapter" 

Caterpillar Information System:

C15 and C18 Engines Product Lifting
2011/04/15 A New Cylinder Head Gasket and Spacer Plate Are Used for 3500 Machine Engines {1100, 1201, 7555}
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Fuel System - Prime
C15 and C18 Engines Overhaul Considerations
2010/08/26 Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
2010/08/26 Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
C27 and C32 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
2010/09/01 Changes to the Usage and Cleaning of the Contamination Monitor Group {0645, 0680, 1280, 1348, 3080, 429F, 5095}
G3306B Gas Engines Fuel Filter
3512C Oil Well Service Engines Product Lifting
2010/12/23 A New Wiring Harness Kit Is Available in Order to Make Repairs on Certain Truck Engines {1254, 1290, 1408}
3512C Oil Well Service Engines Safety Messages
C27 and C32 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install
3512B Petroleum Engines with the ADEM 2 Electronic Control Module E012 High Crankcase Pressure Derate
C27 and C32 Industrial Engines Exhaust Gas Valve (NRS) - Remove and Install
Replacing the High Pressure Fuel Pump on Certain C7 and C9 Engines{1251, 1714} Replacing the High Pressure Fuel Pump on Certain C7 and C9 Engines{1251, 1714}
C27 and C32 Engines for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Alternator and Regulator
Incorrect Torquing on Water Pump Groups for Certain C-10 and C-12 Engines{1361, 7553} Incorrect Torquing on Water Pump Groups for Certain C-10 and C-12 Engines{1361, 7553}
C27 and C32 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C27 and C32 Industrial and Petroleum Engines Turbocharger
2010/09/10 Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.