2010/08/26 Caterpillar

Integrated Toolcarrier:

IT14G (S/N: FWL1-UP; KZN1-UP; 1WN1800-UP)

Service Magazine SEPD1155, 23 July 2010, "New Position and Orientation of the P-Clip on the Bar Link is Available". Disregard this article. See the replacement article that follows.

Description of Change: A new position and orientation of the P-clip on the bar link is available. The change will help to achieve optimum routing of the hose. The new position and orientation will improve the durability of the hoses on the boom of certain Integrated Toolcarriers.

Adaptable To: The new position of the P-clip will loosen the radius of the hose assembly.

Reposition the M12 tapped hole. Refer to Illustration 1 and Illustration 2.

Illustration 1	g02180053
(1) The existing M12 tapped hole (2) The new location of the M12 tapped hole for the P-clip

Illustration 2	g02178854
(A) 330 mm (13.0 inch) (B) 20 mm (0.79 inch) (C) 44 mm (1.73 inch)

Fit and orient the link bar. Orient the P-clip as per Illustration 3.

Illustration 3	g02196234
(D) 45° ± 5°

Illustration 4	g02178250
The new location of the P-clip on the link bar

The new position of the P-clip on the link bar is adaptable to the following machines:

• IT14G (S/N: 1WN1-22155)

• IT14G (S/N: FWL1-824)

The new position of the P-clip on the link bar is effective in production on the following machines:

• IT14G (S/N: 1WN22156-UP)

• IT14G (S/N: FWL825-UP)