Product Link - PL522/523 Caterpillar


Electronic Control Module (ECM) - Flash Program

Usage:

769C 01X
通过以下步骤对 PL522 和 523 闪存编程。 通过 PL522 和 523 闪存编程升级软件。 如果更换了 PL522 和 523,也必须执行 PL522 和 523 的闪存编程。 Caterpillar 电子技师 (Cat ET) 包含程序 WinFlash®。 WinFlash® 用来将软件加载到 PL522 和 523 内。

请参考系统操作、故障诊断与排除、测试和调整, "配置"来配置 PL522 和 523。

注: 可以利用通信适配器 II 对电子控制模块闪存编程。

通信适配器 II 硬件连接在机器维修接头和 PC 串行端口或 PC 并行端口之间。 为 "Caterpillar 通信适配器 II (RP1210)" 配有 Cat ET "通信接口设备"。

闪存编程 PL522 和 523

WinFlash® 用来加载软件。 以下步骤说明了闪存编程 PL522 和 523 的过程。




    图 1g02173443

  1. 选择 "Utilities(应用程序)"和 "Winflash"。



    图 2g02173445

  1. 要想闪存 PL522 和 523 内的网关板,从检测到的 ECM 列表内通过匹配 PL522 或 523 的序列号选择 "Blank ECM(空白 ECM)"。 请参考插图 2。



    图 3g02173446

  1. 选择文件。 请参考插图 3。

  1. 单击 "Begin Flash(开始闪存)"。



    图 4g02173595

  1. 程序加载过程中将出现进度条。 请参考插图 4。

Caterpillar Information System:

A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274} A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
Product Link - PL522/523 MID 161 - CID 1251 - FMI 03
Product Link - PL522/523 MID 161 - CID 1250 - FMI 09
Product Link - PL522/523 MID 161 - CID 0254 - FMI 12
Product Link - PL522/523 MID 161 - CID 0254 - FMI 04
2010/11/05 A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}
Product Link - PL522/523 MID 161 - CID 0168 - FMI 01
Product Link - PL522/523 MID 161 - CID 0168 - FMI 00
Product Link - PL522/523 Diagnostic Code List
450E Backhoe Loader Machine Electronic Control System Data Link
Product Link - PL522/523 Operating Hours Discrepancy
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057} Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Product Link - PL522/523 Electronic Control Module (ECM) - Replace
Product Link - PL522/523 Electrical Connector - Inspect
Product Link - PL522/523 Wiring Harness (Open Circuit) - Test
Product Link - PL522/523 Wiring Harness (Short Circuit) - Test
Product Link - PL522/523 Specifications
Product Link - PL522/523 System Schematic
Installing Tapered Roller Bearings in 6G-6352 Planet Gears in Final Drives of Off-Highway Trucks{0760, 0761, 4050, 4055, 7551} Installing Tapered Roller Bearings in 6G-6352 Planet Gears in Final Drives of Off-Highway Trucks{0760, 0761, 4050, 4055, 7551}
2010/06/21 A New Procedure to Replace the Rear Hydraulic Electronic Pilot Valve Gp On Certain Telehandlers Is Now Available {5051}
AP555E and BG555E Asphalt Pavers Machine Systems Drive Belt (Generator) - Remove and Install
777G Off-Highway Truck Direction and Speed Control
777G Off-Highway Truck Chassis Electronic Control System MID 087 - CID 2183 - FMI 09
777G Off-Highway Truck Chassis Electronic Control System MID 087 - CID 2183 - FMI 14
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.