2010/08/20 Caterpillar

Wheel Loader:

950H (S/N: N1A1858-3355,4000-UP; JAD1-1; JAD105-141; JAD143-143; JAD145-UP; M1G1182-UP; J5J616-1197,1501-UP; K5K1811-UP)

962H (S/N: N4A725-1286,2000-UP; M3G381-UP; J6J245-327,501-UP; K6K337-UP)

966H (S/N: A6D1424-UP; RYF1-UP; A6G2418-4059,5000-UP; A6J899-UP; TAL1-1,174-174,176-176,178-195,198-211,215-234,238-238,241-243,245-UP)

972H (S/N: GTA1-UP; A7D581-UP; A7G806-1312,2000-UP; A7J273-UP)

980H (S/N: MHG948-1293,4000-4179,4999-5089,5091-5113,5115-5115,5117-5232,6000-UP; A8J276-377,4000-UP; JMS3057-3459,4000-4424,5000-UP)

Description of Change: A new tilt sensor bracket and cover are now used on 950H, 962H, 966H, 972H, and 980H machines. The new design of the bracket and cover provide increased durability and protection from debris.

Adaptable To:

Note: Machines built prior to November 2008, may require the installation of two 128-8678 Spacers and two 085-8091 Bolts to offset the new bracket properly.The new bracket and cover are adaptable to the following machines:

• 950H (S/N: J5J1-1511; JAD1-152; K5K1-2954; M1G1-1847; N1A1-4138)

• 962H (S/N: J6J1-505; K6K1-475; M3G1-580; N4A1-2043)

• 966H (S/N: A6D1-2502; A6G1-5153; A6J1-1601; RYF1-358; TAL1-255)

• 972H (S/N: A7D1-920; A7G1-2027; A7J1-367; GTA1-181)

• 980H (S/N: A8J1-4078; JMS1-5386; MHG1-6073)

• 950H (S/N: J5J1512-UP; JAD153-UP; K5K2955-UP; M1G1848-UP; N1A4139-UP)

• 962H (S/N: J6J506-UP; K6K476-UP; M3G581-UP; N4A2044-UP)

• 966H (S/N: A6D2503-UP; A6G5154-UP; A6J1602-UP; RYF359-UP; TAL256-UP)

• 972H (S/N: A7D921-UP; A7G2028-UP; A7J368-UP; GTA182-UP)

• 980H (S/N: A8J4079-UP; JMS5387-UP; MHG6074-UP)