ARD Fuel System - Test
- 起动发动机。
- 执行 "ARD Ignition Test（ARD 点火测试）"。 测试运行大约 5 分钟。
- 当 ARD 点火测试启动时，检查以下位置的燃油管和冷却液管连接：
- 检查 ARD 盖处的燃油管连接有无泄漏
- 检查 ARD 燃油歧管处的燃油管连接有无泄漏
- 检查 ARD 盖处的冷却液管连接有无泄漏
- 检查 ARD 盖处的燃油管连接有无泄漏
Show/hide table
 | |
| 图 1 | g02141616 |
Show/hide table
 | |
| 图 2 | g02141618 |
Show/hide table
 | |
| 图 3 | g02141619 |
Caterpillar Information System:
C6.6 Industrial Engine Vibration Damper - Check
C9.3 Engines for Caterpillar Built Machines Electrical Connectors
C6.6 Industrial Engine Vibration Damper and Pulley
C11 and C13 Engines Fuel Injector
2010/07/30 New Cage Assembly Is Used on TH48-E80 Petroleum Transmissions {3160}
2010/05/19 An Improved Water Line Is Now Used on Certain Commercial Engines {1355, 1380, 1393}
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
C15 and C18 Engines Fuel Priming Pump - Replace
320E and 323E Excavators Cooling System Coolant Level - Check
320E and 323E Excavators Cooling System Coolant Extender (ELC) - Add
C4.4 Industrial Engine Turbocharger - Series Turbochargers
Reuse Guideline for the Flexible Exhaust Pipe Group on Tier 4 Engines {1061} Reuse Guideline for the Flexible Exhaust Pipe Group on Tier 4 Engines {1061}
C6.6 Industrial Engine Product Lifting - Engine
C7.1 Industrial Engine Product Lifting - Clean Emission Module
2010/05/13 New Flash File for Certain C6.6 Engines {1901, 1920}
325 VM and VH Variable Gauge Undercarriage Track Roller - Remove and Install
325 VM and VH Variable Gauge Undercarriage Sprocket - Remove and Install
Reuse and Salvage for Flywheel Assemblies {1156} Reuse and Salvage for Flywheel Assemblies {1156}
C7.1 Industrial Engine Air Control Valve - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine Alternator - Install
C7.1 Industrial Engine Alternator - Remove
C7.1 Industrial Engine Alternator Belt - Remove and Install
C7.1 Industrial Engine ARD Spark Plug - Remove and Install