C4.4 Industrial Engine Caterpillar


Exhaust Gas Valve (NRS)

Usage:

C4.4 448


Illustration 1g02337096
Typical example

(1) Tighten the bolts to the following torque. ... 22 N·m (16 lb ft)



Illustration 2g02337116
Typical example

(2) Tighten the stud to the following torque. ... 11 N·m (97 lb in)

(3) Tighten the plug to the following torque. ... 35 N·m (26 lb ft)



Illustration 3g02337117
Typical example

(4) Tighten the bolts to the following torque. ... 9 N·m (80 lb in)

(5) Tighten the plug to the following torque. ... 9.5 N·m (84 lb in)



Illustration 4g02337118
Typical example

(6) Tighten the nut to the following torque. ... 18 N·m (13 lb ft)

(7) Tighten the bolts to the following torque. ... 18 N·m (13 lb ft)



Illustration 5g02337119
Typical example

(8) Tighten the bolts to the following torque. ... 9 N·m (80 lb in)

Caterpillar Information System:

325D and 329D Excavators Joystick Controls Alternate Patterns
C13, C15, and C18 Tier 4 Final Engines Air Lines
C4.4 Industrial Engine Exhaust Cooler (NRS)
C27 and C32 Tier 4 Engines Mounting Frame
C4.4 Industrial Engine Electrical System
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C27 and C32 Engines for Caterpillar Built Machines ECM - Replace
2010/05/24 A Redesigned Water Lines Group Is Now Used on Certain 3516B Locomotive Engines {1380}
C9.3 Tier 4 Final Engines Fuel Filter Base - Primary
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Assemble
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Remove and Install
C11 and C13 Engines Engine Oil Cooler
C4.4 Industrial Engine Temperature Sensor (NOx Reduction System)
C4.4 Industrial Engine Turbocharger - Single Turbocharger
C11 and C13 Engines Muffler
C4.4 Industrial Engine Turbocharger - Series Turbochargers
320E and 323E Excavators Cooling System Coolant Extender (ELC) - Add
320E and 323E Excavators Cooling System Coolant Level - Check
C15 and C18 Engines Fuel Priming Pump - Replace
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
2010/05/19 An Improved Water Line Is Now Used on Certain Commercial Engines {1355, 1380, 1393}
2010/07/30 New Cage Assembly Is Used on TH48-E80 Petroleum Transmissions {3160}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.