Exhaust Pipe
Show/hide table
Illustration 1 | g03143656 |
Show/hide table
Specification for 295-5233 Exhaust Lines Gp | |||
Item | Qty | Part | Specification Description |
Use the following procedure with numerical sequence 1 to 5 as shown in Illustration 1 in order to tighten the clamps: | |||
1 | 2 | 9N-1941 V Band Clamp | Tighten the third v band clamp sequence to Then lightly tap clamp on bottom, left side, right side, and then next to the bolt. Again retorque the clamp to |
2 | 2 | 176-8234 Clamp | Tighten the second clamp sequence to |
3 | 2 | 8T-4184 Bolt | Tighten the fourth bolt sequence to standard torque. |
4 | 2 | 388-7016 Bent Bolt Clamp | Tighten the fifth bent bolt clamp sequence to |
5 | 2 | 346-0335 Band Clamp | Tighten the first band clamp sequence to |
Caterpillar Information System:
C6.6 Industrial Engine Water Temperature Regulator - Remove and Install
C6.6 Industrial Engine Water Pump - Install
C6.6 Industrial Engine Water Pump - Remove
C6.6 Industrial Engine Engine Oil Pump - Install
C6.6 Industrial Engine Engine Oil Pump - Remove
C6.6 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C6.6 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C6.6 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
773G and 775G Off-Highway Truck Power Train Differential
C6.6 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C6.6 Industrial Engine Engine Oil Filter Base - Remove and Install
C6.6 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C6.6 Industrial Engine Flywheel - Remove
773G and 775G Off-Highway Truck Power Train Axle Mounting (Rear)
C6.6 Industrial Engine Flywheel - Install
C6.6 Industrial Engine Crankshaft Rear Seal - Remove
C6.6 Industrial Engine Crankshaft Rear Seal - Install
C27 and C32 Engines for Caterpillar Built Machines Coolant Level Is Low
D11T Track-Type Tractor MID 082 - CID 1326 - FMI 02
C27 and C32 Engines for Caterpillar Built Machines Fan Drive
Cat® Terrain for Drilling User Guide for Drill Operator Declaration of Conformity
C6.6 Industrial Engine Flywheel Housing - Remove and Install - Standard Housing
CAESultra Glossary
777G Off-Highway Truck VIMSTM 3G and Payload Payload System