Introduction {0374, 4150, 7000, 7590, 7950} Caterpillar

Introduction {0374, 4150, 7000, 7590, 7950}

Usage:

D6D 01Y

Caterpillar Products: Machines with Grease Lubricated Track with Swage; Machines with Greased Lubricated Track (GLT); Machines with Positive Pin Retention (PPR) Track; Machines with Positive Pin Retention 2 (PPR2) Track; Machines with Rotating Bushing Track; Machines with Sealed Positive Pin Retention (PPR) Track; Machines with Sealed Track; Machines with Sleeve Bearing Track; Machines with SystemOne Undercarriage; Machines with non-PPR Sealed and Lubricated Track
Track Drills: MD5150C (S/N: SEY1-UP)

Introduction

Show/hide table

Table 1
Summary of Changes in SEBF8504
Revision	Changes
44–47	Added serial number prefixes for New Product Introduction.
43	Added serial number prefixes for New Product Introduction. Updated introduction information.
42	Added serial number prefixes for New Product Introduction.

© 2019 Caterpillar All Rights Reserved. This guideline is for the use of Caterpillar dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law. Information contained in this document is considered Caterpillar: Confidential Yellow.

This Undercarriage Reconditioning Bulletin contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Undercarriage Reconditioning Bulletin must be used with the latest technical information that is available from Caterpillar.

For technical questions when using this document, work with your Dealer technical Communicator (TC).

To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.

Undercarriage Reconditioning Guide Introduction

The Undercarriage Reconditioning Guide is intended to be a source for reference material pertaining to undercarriage servicing, and contains the following information:

Methods and Procedures

Reconditioning philosophy, weld techniques, wire selection, and application. Procedures for reconditioning undercarriage components are also included in this section.