Base Load Potentiometer Settings
The following settings are for a ten turn potentiometer.
Show/hide table
| Base Load Potentiometer Position |
Base Load Level |
|---|---|
| 0, 0 | 400 kW |
| 1, 0 | 460 kW |
| 2, 0 | 525 kW |
| 3, 0 | 600 kW |
| 4, 0 | 690 kW |
| 5, 0 | 795 kW |
| 6, 0 | 920 kW |
| 6, 55 | 1000 kW |
| 7, 0 | 1075 kW |
| 8, 0 | 1265 kW |
| 9, 0 | 1515 kW |
| 10, 0 | 1825 kW |
Caterpillar Information System:
XQ Auto Paralleling Default Settings for Utility Multifunction Relay
XQ Auto Paralleling Utility Paralleling Mode
XQ Auto Paralleling Island Paralleling Mode
XQ Auto Paralleling Single Unit Mode
XQ Auto Paralleling Fuel System
XQ Auto Paralleling Reference Material
XQ Auto Paralleling Component Location
XQ Auto Paralleling Component Descriptions
XQ Auto Paralleling General Information
XQ Auto Paralleling Electrical System
XQ Auto Paralleling Safety Messages
2010/04/16 A New Strainer Is Used on the Air Starting Systems of Certain C18 and C32 Engines {1451}
XQ Auto Paralleling Operator Controls
XQ Auto Paralleling Abbreviations
XQ Auto Paralleling Glossary
C280 Marine Engines Crankshaft Deflection (Bend)
C7.1 Industrial Engine Configuration Parameters
C7.1 Marine Generator Set Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 Alarms and Shutoffs
C4.4 (Mech) Marine Generator Set MCS-3 Engine Operation with Active Diagnostic Codes
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490} Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Foreword {0374, 4150, 7000, 7590, 7950} Foreword {0374, 4150, 7000, 7590, 7950}
C4.4 (Mech) Marine Generator Set MCS-3 Engine Operation with Intermittent Diagnostic Codes
C4.4 (Mech) Marine Generator Set MCS-3 Configuration Parameters - Customer Specified Parameters