A New Strainer Is Used on the Air Starting Systems of Certain C18 and C32 Engines {1451}
- Generator Set:
- C18 (S/N: GBM1-UP; CYN1-UP; GEN1-UP; MGS1-UP)
- Marine Engine:
- C18 (S/N: WKB1-UP; C1J1-UP; GES1-UP; KJT1-UP; J2K1-UP)
- C32 (S/N: RNE1-UP; RNX1-UP)
- C32 (S/N: RND1-UP; RNR1-UP; RNY1-UP; RNZ1-UP)
Description of Change: The new strainer provides protection to the optional air starter attachment against debris from shipboard piping.
Adaptable To: The new 146-5215 Air Lines Strainer Gp is adaptable back to first production on the serial numbers listed above.
The new 146-5215 Air Lines Strainer Gp or a 300 mesh equivalent are required on the high-pressure supply on vessels with air starting systems.
Note: The new strainer must be installed using the guidelines found in Application and Installation Guide, LEBW4980, "Starting Systems".This change is effective for the serial numbers listed in Table 1.
Show/hide table
Effective Serial Numbers     |
S/N:WKB378-UP     |
S/N:MGS851-UP     |
S/N:T2P747-UP     |
S/N:GEN219-UP     |
S/N:GES163-UP     |
S/N:GBM210-UP     |
S/N:RNX280-UP     |
S/N:RNY772-UP     |
Caterpillar Information System:
2010/06/10 Procedure To Check Crankshaft Deflection in 3600 and C280 Engines {1202}
C9.3 Marine Engines Fastener Group (Vibration Damper)
797F Off-Highway Truck Power Train Tire and Rim (Rear) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Tire and Rim (Front) - Remove and Install
C4.4 (Mech) Marine Generator Set MCS-3 Safety Messages
C7.1 Marine Generator Set Generator Winding Insulation - Test
C4.4 (Mech) Marine Generator Set MCS-3 Declaration of Conformity
2010/04/22 Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
C4.4 (Mech) Marine Generator Set MCS-3 Sensors and Electrical Components - MCS Switches and Alarms
C4.4 (Mech) Marine Generator Set MCS-3 Overspeed
C4.4 (Mech) Marine Generator Set MCS-3 Gauges and Indicators
C4.4 (Mech) Marine Generator Set MCS-3 Model View Illustrations
XQ Auto Paralleling Safety Messages
XQ Auto Paralleling Electrical System
XQ Auto Paralleling General Information
XQ Auto Paralleling Component Descriptions
XQ Auto Paralleling Component Location
XQ Auto Paralleling Reference Material
XQ Auto Paralleling Fuel System
XQ Auto Paralleling Single Unit Mode
XQ Auto Paralleling Island Paralleling Mode
XQ Auto Paralleling Utility Paralleling Mode
XQ Auto Paralleling Default Settings for Utility Multifunction Relay
XQ Auto Paralleling Base Load Potentiometer Settings