Belt Tensioner
Show/hide table
图 1 | g02909076 |
Show/hide table
329-8797 皮带张紧器的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
A | - | - | 最小受限行程为 71 度。 |
1 | - | - | 距自由臂位置 35 度处,弹簧对组件的扭矩为 |
- | - | - | 建议的安装螺栓扭矩为 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
C15 Petroleum Generator Set Engines Speed/Timing Sensor
2010/06/25 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2013/01/16 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
C175-16 Petroleum Generator Set Engines Monitoring System
C11 and C13 Engines Piston and Rings
C13, C15, and C18 Tier 4 Interim Engines Configuration Parameters
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pump
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Assemble
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Disassemble
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Engines {1250, 1256}
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Machine Engines {1250, 1256}
EMCP4.3/4.4 Electronic Control Module (Generator Set)
C15 and C18 Engines for Caterpillar Built Machines Compression Brake
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Remove and Install
C15 and C18 Industrial Engines Camshaft
C15 and C18 Engines for Caterpillar Built Machines Camshaft
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Disassemble
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Assemble
C15 Engine for Caterpillar Built Machines Engine Design
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System)