Boost Pressure Sensor
Show/hide table
| |
| 图 1 | g01951827 |
(1) 压力传感器总成的最终安装扭矩 ...
工作温度 ...
工作电压 ... 5.0 ± 0.25 VDC
最大电源电流 ... 10 mA
最大工作压力（绝对压力） ...
电压（输出信号） ... 电源电压 X（销（kPa）X 坡度）+ 截距
坡度 ... 0.00141093
截距 ... 0.05343915
注: 安装压力传感器总成，使进油压力口低于接头末端。 尽可能接近垂直安装压力传感器总成。
Show/hide table
| 接线表 | |
| 销 | 回路 |
| 1 | 对 |
| 2 | 接地 |
| 3 | 信号 |
Caterpillar Information System:
C15 Petroleum Generator Set Engines Speed/Timing Sensor
2010/06/25 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2013/01/16 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
C175-16 Petroleum Generator Set Engines Monitoring System
C11 and C13 Engines Piston and Rings
C13, C15, and C18 Tier 4 Interim Engines Configuration Parameters
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pump
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Assemble
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Disassemble
TH55FT-E70 and TH55FT-E90 Transmissions Component Location
EMCP4.3/4.4 Data Link
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C9.3 Tier 4 Final Engines Belt Tensioner
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Engines {1250, 1256}
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Machine Engines {1250, 1256}
EMCP4.3/4.4 Electronic Control Module (Generator Set)
C15 and C18 Engines for Caterpillar Built Machines Compression Brake
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Remove and Install
C15 and C18 Industrial Engines Camshaft
C15 and C18 Engines for Caterpillar Built Machines Camshaft
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Disassemble
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Assemble
C15 Engine for Caterpillar Built Machines Engine Design