C9.3 Tier 4 Final Engines Caterpillar


Fuel Filter Base

Usage:

D6T 2B3




图 1g06055952
(3) 燃油滤清器底座组件

表 1
技术规格,用于 343-8126 燃油滤清器底座 
项目  数量  零件  技术规格说明 
234-5013 温度传感器总成  最终安装扭矩为 20 ± 3 N·m (177 ± 27 lb in)。 
325-8634 压力传感器总成  最终安装扭矩为 10 ± 2 N·m (89 ± 18 lb in)
工作电压为 5.00 ± 0.25 VDC。 
1R-0749 燃油滤清器  使用润滑剂稍微润滑即将密封的密封件和孔。
拧紧至扭矩为 35 ± 3 N·m (26 ± 2 lb ft)。 


图 2g06055957

表 2
项目  数量  零件  技术规格说明 
9S-4167 空心螺柱  组装前,向空心螺柱的锥形端涂覆一条长度为 7.6 ± 0.8 mm (0.30 ± 0.03 inch) 的红色 Loctite 263。
拧紧至扭矩为 70 ± 15 N·m (52 ± 11 lb ft)。 
底座的密封表面到空心螺柱 (5) 末端的距离为 24.7 mm (0.97 inch)。 

Caterpillar Information System:

2010/03/22 A Procedure to Properly Torque the Fittings on the Fuel Manifold Group on Certain C13 and C15 On-Highway Truck Engines Is Available {1274, 1380, 1702}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258} Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
2010/10/08 A Slave Relay Should be Used for Customer Connections to EMCP 3 On Certain Generator Sets {4490}
C13 Industrial Engines Pressure Sensor (NRS Absolute)
2010/03/10 A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
2010/03/12 A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/09 A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
C27 and C32 Tier 4 Engines Pressure Sensor (NRS Differential)
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Disassemble
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove and Install
EMCP4.3/4.4 Data Link
TH55FT-E70 and TH55FT-E90 Transmissions Component Location
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Disassemble
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Assemble
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pump
C13, C15, and C18 Tier 4 Interim Engines Configuration Parameters
C11 and C13 Engines Piston and Rings
C175-16 Petroleum Generator Set Engines Monitoring System
2013/01/16 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.