Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
- Articulated Truck
- All
- Asphalt Paver
- All
- Backhoe Loader
- All
- Challenger
- All
- Cold Planer
- All
- Compact Track Loader
- All
- Compact Wheel Loader
- All
- Earthmoving Compactor
- All
- Excavator
- All
- Integrated Toolcarrier
- All
- Landfill Compactor
- All
- Load Haul Dump
- All
- Motor Grader
- All
- Off-Highway Truck/Tractor
- All
- On-Highway Transmission
- All
- Paving Compactor
- All
- Petroleum Transmission
- All
- Pipelayer
- All
- Telehandler
- All
- Track-Type Loader
- All
- Track-Type Skidder
- All
- Track-Type Tractor
- All
- Transmission
- TH55FT-E70 (S/N: PCJ1-UP)
- TH55FT-E90 (S/N: THE1-UP)
- Underground Articulated Truck
- All
- Vibratory Soil Compactor
- CP44B (S/N: GNB1-UP)
- CS44B (S/N: 4G31-UP)
- Wheel Dozer
- All
- Wheel Loader
- All
- Wheel Tractor-Scraper
- All
Introduction
Show/hide table
Revision | Summary of Changes in SEBF8317 |
---|---|
16 | The information contained in SEBF8317 has been moved and combined with , SEBF8029 Reuse and Salvage Guidelines, "Index of Repair Process Engineering Publications".
SEBF8317 will be removed form SIS Web in December 2019. |
15 | Added new serial number prefixes for New Product Introduction (NPI).
Updated copyright date to 2018. Removed old point of contacts. Added new point of contact. |
14 | Updated referenced material. |
14 | Updated referenced material. |
13 | Added media numbers to tables. |
© 2018 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.
Information contained in this document is considered Caterpillar: Confidential Yellow.
Caterpillar Information System:
2010/10/08 A Slave Relay Should be Used for Customer Connections to EMCP 3 On Certain Generator Sets {4490}
C13 Industrial Engines Pressure Sensor (NRS Absolute)
2010/03/10 A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
2010/03/12 A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/09 A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
C27 and C32 Tier 4 Engines Pressure Sensor (NRS Differential)
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Disassemble
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record
C11 and C13 Engines Water Pump
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
2010/03/22 A Procedure to Properly Torque the Fittings on the Fuel Manifold Group on Certain C13 and C15 On-Highway Truck Engines Is Available {1274, 1380, 1702}
C9.3 Tier 4 Final Engines Fuel Filter Base
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove and Install
EMCP4.3/4.4 Data Link
TH55FT-E70 and TH55FT-E90 Transmissions Component Location
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Disassemble
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Assemble
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pump
C13, C15, and C18 Tier 4 Interim Engines Configuration Parameters
C11 and C13 Engines Piston and Rings
C175-16 Petroleum Generator Set Engines Monitoring System