2010/03/10 Caterpillar


A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}

Usage:

627F 1DL
Agricultural Tractor:
MT735 (S/N: AKN1-UP)
MT855 (S/N: BCC1-UP)
MT865 (S/N: BDS1-UP)
MTC855 (S/N: 8181-UP)
MTC865 (S/N: 8191-UP)
Articulated Truck:
735 (S/N: B1N1-UP; AWR1-UP)
735B (S/N: L4D1-UP; T4P1-UP)
740 (S/N: AXM1-UP; B1P1-UP)
740 EJECTOR (S/N: WWE1-UP; B1R1-UP; AZZ1-UP)
740B (S/N: L4E1-UP; T4R1-UP)
740B EJECTOR (S/N: L4F1-UP; T4S1-UP)
D350ESeries II (S/N: 2XW1-UP)
D400ESeries II (S/N: APF1-UP; 8PS1-UP)
Cold Planer:
PM-200 (S/N: P1C1-UP)
PM-201 (S/N: PNM1-UP)
PM200 (S/N: P1M1-UP)
Landfill Compactor:
826C (S/N: 87X1-UP)
826GSeries II (S/N: AYH1-UP)
826H (S/N: AWF1-UP; ZXT1-UP)
836G (S/N: BRL1-UP; 7MZ1-UP)
836H (S/N: BXD1-UP; XTR1-UP)
Soil Compactor:
825C (S/N: 86X1-UP)
825GSeries II (S/N: AXB1-UP)
825H (S/N: ZHC1-UP; AZW1-UP)
Excavator:
245 (S/N: 82X1-UP)
245BSeries II (S/N: 6MF1-UP)
245D (S/N: 4LK1-UP)
365C (S/N: ELC1-UP; GWC1-UP; MEM1-UP; FEN1-UP; PAR1-UP; MCS1-UP; MCY1-UP)
374D (S/N: PJA1-UP; PAP1-UP; PAS1-UP; PAX1-UP)
385B (S/N: MYA1-UP; RCD1-UP; BKF1-UP; FDL1-UP; ANS1-UP; CLS1-UP; BKX1-UP; BLY1-UP)
385C (S/N: EDA1-UP; MMA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; GLT1-UP; WAW1-UP; MNZ1-UP)
390D (S/N: WAG1-UP; BYP1-UP; WAP1-UP; WBT1-UP; KCZ1-UP)
5090B (S/N: CLD1-UP; SJY1-UP)
Load Haul Dump:
R2900 (S/N: 5TW1-UP)
R2900G (S/N: GLK1-UP; JLK1-UP)
R3200G (S/N: MAZ1-UP)
Motor Grader:
24M (S/N: B9K1-UP)
Off-Highway Truck/Tractor:
770 (S/N: BZZ1-UP)
772 (S/N: RLB1-UP)
Pipelayer:
583T (S/N: CMX1-UP)
587T (S/N: FAT1-UP)
Road Reclaimer/Soil Stabilizer:
RM-500 (S/N: ASW1-UP)
Track-Type Tractor:
D7RSeries II (S/N: AEC1-UP; AFG1-UP; ABJ1-UP; BRM1-UP; AGN1-UP; ACS1-UP; ADW1-UP)
D8N (S/N: 9TC1-UP; 1XJ1-UP; 5TJ1-UP)
D8RSeries II (S/N: AKA1-UP; 6YZ1-UP)
D8T (S/N: J8B1-UP; MLN1-UP; FCT1-UP; KPZ1-UP)
D9N (S/N: 6XJ1-UP)
D9T (S/N: RJS1-UP)
Underground Articulated Truck:
AD30 (S/N: CXR1-UP; DXR1-UP)
AD45B (S/N: CXM1-UP)
AD55 (S/N: ANW1-UP; DNW1-UP)
Wheel Dozer:
824C (S/N: 85X1-UP)
824GSeries II (S/N: AWW1-UP)
824H (S/N: ASX1-UP)
834G (S/N: BPC1-UP; 6GZ1-UP)
834H (S/N: XDC1-UP; BTX1-UP)
Wheel Loader:
966GSeries II (S/N: ANT1-UP; ANZ1-UP)
972GSeries II (S/N: AWP1-UP; ANY1-UP)
980GSeries II (S/N: AXG1-UP; AWH1-UP)
980G (S/N: BGC1-UP)
980H (S/N: MHG1-UP; A8J1-UP; JMS1-UP)
988G (S/N: BNH1-UP; 2TW1-UP)
988HSeries II (S/N: 4401-UP)
988H (S/N: BXY1-UP)
Wheel Tractor-Scraper:
621B (S/N: 2GB1-UP; 45P1-UP)
621E (S/N: 6AB1-UP)
621F (S/N: 4SK1-UP)
621G (S/N: DBB1-UP; CEN1-UP; ALP1-UP; CEP1-UP; DBX1-UP)
623B (S/N: 46P1-UP)
623E (S/N: 6CB1-UP; 6YF1-UP)
623F (S/N: 6BK1-UP; 5EW1-UP)
623G (S/N: DBC1-UP; CES1-UP; ARW1-UP; CEW1-UP; DBY1-UP)
627E (S/N: 6EB1-UP; 6GB1-UP; 7CG1-UP)
627F (S/N: 1DL1-UP)
627G (S/N: DBD1-UP; AXF1-UP; CEX1-UP; CEZ1-UP; DBZ1-UP)
631G (S/N: DFA1-UP; DEM1-UP)
637D (S/N: 26W1-UP; 27W1-UP; 71W1-UP)
637ESeries II (S/N: 1FB1-UP)
637G (S/N: DFJ1-UP; DEX1-UP)
641B (S/N: 65K1-UP)
650B (S/N: 58K1-UP)
651B (S/N: 67K1-UP)
651E (S/N: 88Z1-UP)
657 (S/N: 53K1-UP)
657B (S/N: 53K1-UP; 68K1-UP; 47M1-UP)
657E (S/N: 5YR1-UP; 6PR1-UP; 6TR1-UP; 7KR1-UP; 86Z1-UP; 87Z1-UP; 90Z1-UP; 91Z1-UP)
657G (S/N: W1B1-UP; W1C1-UP; W1E1-UP; W1F1-UP; A4G1-UP; GER1-UP)
660B (S/N: 58K1-UP)
666B (S/N: 66K1-UP)
Service Magazine SEPD1095, March 2010, "A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines". Disregard this article. See the article that follows.

Caterpillar Remanufacturing is now allowing the use of the 197-3053 Screw in place of the existing 274-4491 Arm Adjustment Screw and the 232-0253 Arm Adjustment Screw in the 10R-1364 Rocker Arm As and the 10R-4522 Rocker Arm As. Refer to Illustration 1 for the differences in the screws.




Illustration 1g02126227

(1) 197-3053 Screw

(2) 274-4491 Arm Adjustment Screw and 232-0253 Arm Adjustment Screw

The functionality of the 197-3053 Screw, the 274-4491 Arm Adjustment Screw, and the 232-0253 Arm Adjustment Screw is identical and the screws can be used on the same rocker shaft assemblies.

Caterpillar Information System:

2010/03/12 A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/09 A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
C27 and C32 Tier 4 Engines Pressure Sensor (NRS Differential)
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Disassemble
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record
C11 and C13 Engines Water Pump
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head Valves
C15 and C18 Industrial Engines Precooler - Remove and Install - For Series Turbo Applications
C-10, C-12 and C-15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
C13 Industrial Engines Pressure Sensor (NRS Absolute)
2010/10/08 A Slave Relay Should be Used for Customer Connections to EMCP 3 On Certain Generator Sets {4490}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258} Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
2010/03/22 A Procedure to Properly Torque the Fittings on the Fuel Manifold Group on Certain C13 and C15 On-Highway Truck Engines Is Available {1274, 1380, 1702}
C9.3 Tier 4 Final Engines Fuel Filter Base
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove and Install
EMCP4.3/4.4 Data Link
TH55FT-E70 and TH55FT-E90 Transmissions Component Location
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Disassemble
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Assemble
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.