Fuel Pressure Sensor
Show/hide table
| |
| Illustration 1 | g02113898 |
(1) Final installation torque for the pressure sensor group ...
Operating voltage ... 5.00 ± 0.25 VDC
Operating temperature ...
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Camshaft
2010/08/17 New Turbochargers Are Used on Some C18 Industrial Engines {1052, 1053}
G3500 Generator Sets Model View Illustrations
C7.1 Industrial Engine and Generator Set Ether Starting Aid - Test
G3512E Generator Set Engine Fuel Metering Valve - Test
G3500 Generator Sets Additional Messages
2010/03/02 New Settings Are Now Used For EMCP 3 On Certain Generator Sets {4490}
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing - Replace - SR5 Generator Bearings
C15 and C18 Petroleum Generator Sets Generator Bearing - Inspect
349F and 352F Excavators Hydraulic System Oil - Change
349F and 352F Excavators Hydraulic System Main Hydraulic Pump Air - Purge
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000} Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000}
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C-10, C-12 and C-15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
C15 and C18 Industrial Engines Precooler - Remove and Install - For Series Turbo Applications
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head Valves
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
C11 and C13 Engines Water Pump
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Disassemble