Camshaft
Show/hide table
| |
| Illustration 1 | g03153160 |
Show/hide table
| |
| Illustration 2 | g03153163 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| Before assembly, lubricate the camshaft bearings, the journals, and the lobes with a 50/50 mixture of green 8T-2998 Lubricant and clean engine oil. | |||
| 1 | 1 | 420-0455 Camshaft | The end of the camshaft that is marked "F" must be placed at the front of the engine. |
| 2 | 1 | 420-0456 Camshaft | The end of the camshaft that is marked "F" must be placed at the front of the engine. |
| A | - | - | Diameter of camshaft journal is |
Show/hide table
| |
| Illustration 3 | g03153179 |
Show/hide table
| Item | Qty | Part | Specification Description |
| - | - | - | Use the following procedure to determine the actual camshaft lobe lift: 1. Measure camshaft lobe height (C). 2. Measure the base circle (D). 3. Subtract the base circle (D) from the camshaft lobe height (C). The difference is the actual camshaft lobe lift (B). |
| - | - | - | Specified camshaft lobe lift (B) for: |
| Inlet lobe is |
|||
| Exhaust lobe is |
|||
| Injector lobe (right blank) is |
|||
| Injector lobe (left blank) is |
Caterpillar Information System:
2010/08/17 New Turbochargers Are Used on Some C18 Industrial Engines {1052, 1053}
G3500 Generator Sets Model View Illustrations
C7.1 Industrial Engine and Generator Set Ether Starting Aid - Test
G3512E Generator Set Engine Fuel Metering Valve - Test
G3500 Generator Sets Additional Messages
2010/03/02 New Settings Are Now Used For EMCP 3 On Certain Generator Sets {4490}
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing - Replace - SR5 Generator Bearings
C15 and C18 Petroleum Generator Sets Generator Bearing - Inspect
349F and 352F Excavators Hydraulic System Oil - Change
349F and 352F Excavators Hydraulic System Main Hydraulic Pump Air - Purge
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base
C13 Industrial Engines Fuel Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000} Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000}
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C-10, C-12 and C-15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
C15 and C18 Industrial Engines Precooler - Remove and Install - For Series Turbo Applications
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head Valves
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
C11 and C13 Engines Water Pump
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications