Model View Illustrations
下图所示为 G3520E 的各种典型特征。 该图没有显示所有可选装的选项。
Show/hide table
| |
| 图 1 | g02113676 |
|
G3520E 右侧 (1) 机油滤清器 (2) 发动机控制模块 (3) 水套出水口 (4) 吊耳 (5) 后冷器 (6) 油门 (7) 进气口 (8) 后冷却器放水口 (9) 进水口 (10) 发动机机油放油口 (11) 机油滤清器 | |
Show/hide table
| |
| 图 2 | g02113674 |
|
G3520E 左侧 (4) 吊耳 (12) 排气管 (13) 交流发电机 (14) 水泵 (15) 油位表 (16) 电起动装置 | |
Caterpillar Information System:
C7.1 Industrial Engine and Generator Set Ether Starting Aid - Test
G3512E Generator Set Engine Fuel Metering Valve - Test
G3500 Generator Sets Additional Messages
2010/03/02 New Settings Are Now Used For EMCP 3 On Certain Generator Sets {4490}
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing - Replace - SR5 Generator Bearings
C15 and C18 Petroleum Generator Sets Generator Bearing - Inspect
349F and 352F Excavators Hydraulic System Oil - Change
349F and 352F Excavators Hydraulic System Main Hydraulic Pump Air - Purge
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base
C27 Generator Set Engines Air Lines
349F and 352F Excavators Hydraulic System Oil Filter (Pilot) - Replace
2010/08/17 New Turbochargers Are Used on Some C18 Industrial Engines {1052, 1053}
C27 and C32 Engines for Caterpillar Built Machines Camshaft
C13 Industrial Engines Fuel Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000} Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000}
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C-10, C-12 and C-15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
C15 and C18 Industrial Engines Precooler - Remove and Install - For Series Turbo Applications
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head Valves
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
C11 and C13 Engines Water Pump