C13, C15, and C18 Tier 4 Final Engines Caterpillar


Speed/Timing Sensor

Usage:

826K 232

主转速 / 正时传感器



图 1g02113054

注: 拧紧螺栓 (2) 之前,确保转速传感器总成 (1) 已落座。

注: 确保支架 (3) 是按照所示的方位安装的。

工作温度 ... −40 至 120 °C (−40 至 216 °F)

输出类型 ... 模拟

工作温度 ... −40 至 120 °C (−40 至 216 °F)

(2) 螺栓的扭矩 ... 28 ± 7 N·m (21 ± 5 lb ft)

辅助转速 / 正时传感器



图 2g02112993

注: 拧紧螺栓 (1) 之前,确保转速传感器总成 (2) 已落座。

注: 确保支架 (3) 是按照所示的方位安装的。

工作温度 ... −40 至 120 °C (−40 至 216 °F)

输出类型 ... 模拟

(1) 螺栓的扭矩 ... 28 ± 7 N·m (21 ± 5 lb ft)

Caterpillar Information System:

C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing - Replace - SR5 Generator Bearings
C15 and C18 Petroleum Generator Sets Generator Bearing - Inspect
349F and 352F Excavators Hydraulic System Oil - Change
349F and 352F Excavators Hydraulic System Main Hydraulic Pump Air - Purge
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base
C27 Generator Set Engines Air Lines
349F and 352F Excavators Hydraulic System Oil Filter (Pilot) - Replace
C18 Generator Set Electronic Modular Control Panel 3 (EMCP 3)
349F and 352F Excavators Hydraulic System Oil Filter (Case Drain) - Replace
C280-16 Petroleum Engine Temperature Sensor
797F and 797F XQ Off-Highway Trucks Machine Systems Air Tank (Primary) - Remove and Install
Procedure to Install the 353-6981 Drive Coupling Assembly on Some G3500 Engines{5510} Procedure to Install the 353-6981 Drive Coupling Assembly on Some G3500 Engines{5510}
2010/03/02 New Settings Are Now Used For EMCP 3 On Certain Generator Sets {4490}
G3500 Generator Sets Additional Messages
G3512E Generator Set Engine Fuel Metering Valve - Test
C7.1 Industrial Engine and Generator Set Ether Starting Aid - Test
G3500 Generator Sets Model View Illustrations
2010/08/17 New Turbochargers Are Used on Some C18 Industrial Engines {1052, 1053}
C27 and C32 Engines for Caterpillar Built Machines Camshaft
C13 Industrial Engines Fuel Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000} Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000}
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.