Transmission Reuse and Salvage Manual Contents {0374, 3030}
- Articulated Truck
- All
- Asphalt Paver
- All
- Backhoe Loader
- All
- Challenger
- All
- Cold Planer
- All
- Compact Track Loader
- All
- Compact Wheel Loader
- All
- Excavator
- All
- Integrated Toolcarrier
- All
- Landfill Compactor
- All
- Load Haul Dump
- All
- Motor Grader
- All
- Off-Highway Truck/Tractor
- All
- On-Highway Transmission
- All
- Paving Compactor
- All
- Petroleum Transmission
- All
- Pipelayer
- All
- Telehandler
- All
- Track-Type Loader
- All
- Track-Type Skidder
- All
- Track-Type Tractor
- All
- Transmission
- All OEM Transmissions
- Underground Articulated Truck
- All
- Wheel Dozer
- All
- Wheel Loader
- All
- Wheel Tractor-Scraper
- All
Introduction
Show/hide table
Revision | Summary of Changes in SEBF8313 |
---|---|
18 | The information contained in SEBF8313 has been moved and combined with, , SEBF8029 Reuse And Salvage Guidelines , "Index of Repair Process Engineering Publications". , SEBF8313 will be removed from SIS Web in December 2019. |
17 | Updated table formatting and removed media that is no longer available. Added serial number prefixes. |
16 | Added new serial number prefixes for New Product Introduction (NPI).
Updated copyright date to 2018. Removed old point of contacts. Added new point of contact. |
15 | Updated referenced material. |
14 | Added media to table. |
© 2018 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.
Information contained in this document is considered Caterpillar: Confidential Yellow.
Caterpillar Information System:
EMCP4.1/EMCP4.2 Electrical Connector - Inspect
EMCP4.1/EMCP4.2 Wiring Harness (Open Circuit) - Test
EMCP4.1/EMCP4.2 Wiring Harness (Short Circuit) - Test
EMCP4.1/EMCP4.2 Diagnostic Capabilities
EMCP4.1/EMCP4.2 Diagnostic Trouble Code List
EMCP4.1/EMCP4.2 Engine Cooldown Warning
EMCP4.1/EMCP4.2 Engine Overcrank Warning
EMCP4.1/EMCP4.2 Engine Overspeed Warning
EMCP4.1/EMCP4.2 Engine Speed Warning
EMCP4.1/EMCP4.2 Engine Underspeed Warning
EMCP4.1/EMCP4.2 Generator Control Not in Automatic Warning
EMCP4.1/EMCP4.2 Generator Output Sensing Circuit Fault
349F and 352F Excavators Engine Oil Level - Check
EMCP4.1/EMCP4.2 Electronic Control Module (Generator Set) - Replace
EMCP4.1/EMCP4.2 Engine Setpoint Verification - Test
EMCP4.1/EMCP4.2 Speed Sensor (Engine) - Adjust
EMCP4.1/EMCP4.2 External Potential Transformer Connections
C175-16 Marine Engines Speed Sensor - Clean/Inspect
EMCP4.1/EMCP4.2 Engine Speed Timing Calibration - Setup
349F and 352F Excavators Fumes Disposal Filter Element - Replace - If Equipped
EMCP4.1/EMCP4.2 System Operation
EMCP4.1/EMCP4.2 Event Viewing
EMCP4.1/EMCP4.2 Voltage and Frequency Adjustment
EMCP4.1/EMCP4.2 Thermocouple Module - EMCP 4.2 Only