C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Camshaft Position Sensor - Remove and Install

Usage:

826K 232

拆卸步骤

表 1
所需工具 
工具  零件号  说明  数量 
207-1601  橡胶润滑剂 


    图 1g02106354

  1. 断开线束组件,然后拆下螺栓 (1)。 拆下凸轮轴位置传感器 (2) 和 O 形密封圈。

安装步骤

  1. 按与拆卸相反的顺序安装凸轮轴位置传感器 (2)。

    1. 在安装凸轮轴位置传感器 (2) 之前,将工具 (A) 涂抹到 O 形密封圈上。
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.