Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176} Caterpillar


Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Usage:

D6D 01Y
Caterpillar Products
Machines with Grease Lubricated Track with Swage
Machines with Greased Lubricated Track (GLT)
Machines with Positive Pin Retention (PPR) Track
Machines with Positive Pin Retention 2 (PPR2) Track
Machines with Rotating Bushing Track
Machines with Sealed Positive Pin Retention (PPR) Track
Machines with Sealed Track
Machines with Sleeve Bearing Track
Machines with non-PPR Sealed and Lubricated Track
Track Drills
MD5150C (S/N: SEY1-UP)

Introduction

Table 1
Revision  Summary of Changes in SEBF8591 
19–22  Added serial number prefixes for New Product Introduction. 
18  Added serial number prefixes for New Product Introduction. 
17  Added serial number prefixes for New Product Introduction.
Updated introduction information. 

© 2019 Caterpillar All Rights Reserved. This guideline is for the use of Caterpillar dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law. Information contained in this document is considered Caterpillar: Confidential Yellow.

This Undercarriage Reconditioning Bulletin contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Undercarriage Reconditioning Bulletin must be used with the latest technical information that is available from Caterpillar.

For technical questions when using this document, work with your Dealer technical Communicator (TC).

To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.

Canceled Part Numbers and Replaced Part Numbers

This document does not include all Canceled part number and replaced part number information. Use NPR on SIS for information about Canceled part numbers and replaced part numbers. NPR will provide the current part numbers for replaced parts.

Equipment

Table 2
Description 
(1) Is equipment available that can be used for cleaning the track prior to service? (Power washer or steam cleaner) 
 
 
(2) Is the track press capable of servicing all models of track that is serviced in the track shop? 
 
 
(3) Is tooling available that can be used for removing the plastic plugs and rubber stoppers from the oil cavity on the track? 
 
 
(4) Is tooling available that can be used for removing the track bolts and nuts? 
 
 
(5) Is tooling available that can be used for removing the paint from the mating surfaces of the track shoes and track links? (Grinding wheel or wire brush) 
 
 
(6) Is the available lighting adequate for inspecting the track components? (Bushings, track pins, track links, and thrust rings) 
 
 
(7) Is a table available that can be used for holding a set of track links? 
 
 
(8) Is a wash tank available for cleaning the track components? (Bushings, track pins, track links, and thrust rings) 
 
 
(9) Is tooling available to tighten the track bolts to the proper torque? 
 
 
(10) Is a pressure test available for testing the integrity of the track joint? ( 170-5664 Test and Fill Cart Gp or FT2724 Pressure Gauge Tool Gp) 
 
 
(10) Is a lubricator available for filling the track joint to the proper oil fill volume? ( 170-5664 Test and Fill Cart Gp or portable lubricator) 
 
 
(11) Is a shoe lifter used for removing the track shoes from the link assembly? 
 
 
Comments: 
 
 
 
 

Tooling and Accessories

Table 3
Description 
(1) Are seal installers available for all models of track that is serviced in the track shop? 
 
 
(2) Are the seal installers in good condition? (No chips or cracks) 
 
 
(3) Is the contact tooling for the track press in good condition? (No chips, cracks, or mushrooming) 
 
 
(4) Are bushing end grooving gauges available for all models of track that is serviced in the track shop? 
 
 
(5) Are lint free towels available for cleaning the track components? 
 
 
(6) Is clean oil available for lubricating the load ring of the track seals? (Must be covered and free of contamination) 
 
 
Comments: 
 
 
 
 

Literature

Table 4
Description 
(1) Is Undercarriage Reconditioning Guide, SEBF8599 current and available to the mechanics and supervisors? 
 
 
(2) Are the wall charts current and available to the mechanics for easy accessibility? (SENR1788 and , SENR1838) 
 
 
(3) Are track servicing videos current and available for mechanics and supervisors? (PEVN4322, , SEVN1385, and , PEVN4329) 
 
 
Comments: 
 
 
 
 

Training

Table 5
Description 
(1) Have the supervisors and mechanics attended the Undercarriage Repair Process Training Class in Peoria? 
 
 
(2) Have the mechanics and supervisors been trained on reuse guidelines? 
 
 

Recommendations

Table 6
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Caterpillar Information System:

793F Off-Highway Truck Machine Systems Display Module - Remove and Install
Installation of the Synchronization Module{4480} Installation of the Synchronization Module{4480}
793F Off-Highway Truck Machine Systems Magnetic Switch (Main Power) - Remove and Install
2010/01/08 Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251}
2009/12/09 Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251, 1290}
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Install
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Remove
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Install
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Remove
349F and 352F Excavators Joystick Controls Alternate Patterns
3508, 3512 and 3516 Generator Set Engines Piston Cooling Jets - Remove and Install
Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254} Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254}
793F Off-Highway Truck Machine Systems Electronic Control Module (Advisor) - Remove and Install - VIMS
C18 Generator Set Exciter - Remove and Install
3508, 3512 and 3516 Generator Set Engines Camshaft - Remove
C9.3 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (ARD Combustion Air)
793F Off-Highway Truck Machine Systems Electronic Control Module (Road Analysis Control) - Remove and Install
C9.3 Tier 4 Final Engines Temperature Sensor (DPF Inlet, Flame Detect)
D6T Track Type Tractor Machine Systems Mounting Straps
793F Off-Highway Truck Machine Systems Electronic Control Module (Power Train) - Remove and Install
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176} Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
793F Off-Highway Truck Machine Systems Electronic Control Module (Integrated Brake) - Remove and Install
793F Off-Highway Truck Machine Systems Electronic Control Module (VIMS Main Module) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.