C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Caterpillar


Radiator Restrictions

Usage:

C9.3 C9N
Společnost Caterpillar odrazuje od používání zařízení omezujících proudění vzduchu, která se montují před chladiče motoru. Omezení proudění vzduchu může způsobit následující stavy:

  • vysokou teplotu výfukových plynů,

  • ztráta výkonu,

  • nadměrné používání ventilátoru,

  • zvýšenou spotřebu paliva.

Pokud je nutné použít zařízení omezující proudění vzduchu, musí mít zařízení trvalý otvor umístěný přímo v ose s nábojem ventilátoru. Zařízení musí mít otvor o velikosti nejméně 770 cm2 (120 in2).

Vystředěný otvor umístěný přímo v ose s nábojem ventilátoru je stanoven proto, aby zabránil přerušovanému proudění vzduchu k lopatkám ventilátoru. Přerušované proudění vzduchu k lopatkám ventilátoru může způsobit poruchu ventilátoru.

Společnost Caterpillar doporučuje použití výstražného zařízení teploty v přívodním potrubí nebo montáž měřidla teploty nasávaného vzduchu. Výstražné zařízení teploty v přívodním potrubí je nutné nastavit na 90 °C (194 °F). Teplota v přívodním potrubí nesmí překročit 75 °C (167 °F). Teploty, které překročí tento limit, mohou způsobit ztrátu výkonu a případné poškození motoru.

Caterpillar Information System:

2009/10/20 A New Version of Caterpillar Electronic Technician (ET) Better Supports G3400 and G3500 Engines {0599, 1901}
Bench Test Procedure for a 797F Off-Highway Truck Transmission {3030, 3073, 3139} Bench Test Procedure for a 797F Off-Highway Truck Transmission {3030, 3073, 3139}
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Fuel Related Components in Cold Weather
C13 and C15 On-highway Engines ARD Nozzle Heater - Test
CX31-P600 Petroleum Transmission General Information
349F and 352F Excavators Rollover Protective Structure (ROPS) - Inspect
Troubleshooting Cycling of the Engine Cooling Fan{1353, 1356, 1359, 1901, 5061} Troubleshooting Cycling of the Engine Cooling Fan{1353, 1356, 1359, 1901, 5061}
349F and 352F Excavators Machine System Specifications Rollover Protective Structure (ROPS) Mounting
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Identification Signal - Test
PM3516 Power Modules Generator Set Installation
PM3516 Power Modules Declaration of Conformity
PM3516 Power Modules Sound Information
C15 and C18 Engines Diagnostic Flash Code Retrieval
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Aftercooler Core - Clean/Test - Sea Water Cooled (If Equipped)
C15 Engine Maintenance Interval Schedule
G3304B and G3306B Engines Intake Manifold Air Pressure Is High
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Engine Starting
2009/10/19 A New Backing Pad Is Available for the 127 mm (5 inch) Rotary Grinding Disc {0674, 0677, 0685}
C13, C15, and C18 Tier 4 Interim Engines Timing - Calibrate
G3512E Generator Set Engine Fuel Control - Test
C15 Engine Product Description
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Safety Messages
C15 Engine Plate Locations and Film Locations
C15 Engine Refill Capacities and Recommendations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.